RARE user and assistance email list

[mc36 <>]

hi,
so for performance measures, it should not change a thing if it's standalone 
or stacked...
but if you still want it standalone, feel free to replace the configs from 
the archives anytime...
imho it was converted to stacking a month ago or so...
br,
cs



On 6/1/22 12:28, Xavier Jeannin wrote:
> Hello
>
> We would like to test the system as a stand alone machine.
> This work is made in the context of performance assessment.
>
> I do not want to disturb your development. Maybe we should book the POZNAN 
> router for a specific date to make our test ?
>
> Regards
> Xavier
>
> Le 01/06/2022    11:53, mc36 a   crit  :
> > hi,
> > if it was a standalone switch then yess, but as we're playing with 
> > stack/multichassis/linecard-based/whatever we call it for a while,
> > the backplane stuff alone involves mpls because regular bridging is expressed 
> > internally as vpls (and basic routing as mpls vpn)...
> > where the inner label is the regular service label and the outer label is 
> > identifying a member of the stack...
> > br,
> > cs
> >
> > On 6/1/22 11:42, Xavier Jeannin wrote:
> > > Hello Csaba,
> > >
> > > What about "profile-renater-peering-l2.p4" and 
> > > "profile-renater-peering-l2.tmpl" ?
> > > Can we use it form bridging performance test ?
> > >
> > > Regards
> > > Xavier
> > >
> > > Le 01/06/2022       10:06, mc36 a     crit   :
> > > > hi,
> > > > two things:
> > > > 1) the lab was recently reconfigured to be a stack of poz-bud-fra-ams...
> > > >          if you want to configure any ports of these four, please perform it 
> > > > at
> > > >          netops@rare-bastion-86-7968c4d54f-qkv2x:~$ ctrl-rare
> > > > 2) the current active profile is geant-testbed at all of these which
> > > >          does not include bridging... you can set the profile individually,
> > > >          let's say just on POZ0001#tna-set-profile <capitalized name from>
> > > > https://bitbucket.software.geant.org/projects/RARE/repos/rare/browse/profiles,
> > > >          but, right now, we don't have anything with bridging and mpls both 
> > > > enabled...
> > > >          i'll add a vpls profile asap but i'll take some time until it goes 
> > > > through
> > > >          the release processes... (imho it should be out by next monday...)
> > > > br,
> > > > cs
> > > >
> > > >
> > > >
> > > > On 6/1/22 09:51, Tomasz Szewczyk wrote:
> > > > > Hi,
> > > > >
> > > > > I'm trying to make RFC2889 address learning/caching tests on poz-rare
> > > > >
> > > > > I have bridge defined with ports:
> > > > > POZ0001#show bridge 3
> > > > > packet                                                         byte
> > > > > iface                                         fwd                 phys        
> > > > >  tx         rx drop tx         rx         drop grp
> > > > > brprt bvi
> > > > > sdn4                                                 true         true        
> > > > >  0 0 0                                 0                 0 0
> > > > > sdn6                                                 true         true        
> > > > >  0 0 0                                 0                 0 0
> > > > > sdn7                                                 true         true        
> > > > >  0 0 0                                 0                 0 0
> > > > >
> > > > >
> > > > > packet byte
> > > > > addr         iface         static         time             tx         rx drop 
> > > > >         tx rx         drop
> > > > >
> > > > > But there's no traffic.
> > > > > Interfaces are configred this way:
> > > > >
> > > > > POZ0001#sh run int sdn4
> > > > > interface sdn4
> > > > >          description POZ0001@31/0 -> SPIRENT@PSCN-#1
> > > > >          mtu 2000
> > > > >          macaddr 0031.645a.1c09
> > > > >          lldp enable
> > > > >          cdp enable
> > > > >          bridge-group 3
> > > > >          no shutdown
> > > > >          no log-link-change
> > > > >          exit
> > > > > !
> > > > >
> > > > > Do I need any specific configuration for that?
> > > > >          I'm sending just untagged frames from the tester.
> > > > >
> > > > > br
> > > > > Tomek