Skip to Content.
Sympa Menu

rare-users - Re: [RARE-users] L2 switching

Subject: RARE user and assistance email list

List archive

Re: [RARE-users] L2 switching


Chronological Thread 
  • From: Xavier Jeannin <>
  • To:
  • Subject: Re: [RARE-users] L2 switching
  • Date: Wed, 1 Jun 2022 11:42:34 +0200

Hello Csaba,

What about "profile-renater-peering-l2.p4" and "profile-renater-peering-l2.tmpl" ?
Can we use it form bridging performance test ?

Regards
Xavier

Le 01/06/2022 à 10:06, mc36 a écrit :
hi,
two things:
1) the lab was recently reconfigured to be a stack of poz-bud-fra-ams...
   if you want to configure any ports of these four, please perform it at
   netops@rare-bastion-86-7968c4d54f-qkv2x:~$ ctrl-rare
2) the current active profile is geant-testbed at all of these which
   does not include bridging... you can set the profile individually,
   let's say just on POZ0001#tna-set-profile <capitalized name from>
https://bitbucket.software.geant.org/projects/RARE/repos/rare/browse/profiles,
   but, right now, we don't have anything with bridging and mpls both enabled...
   i'll add a vpls profile asap but i'll take some time until it goes through
   the release processes... (imho it should be out by next monday...)
br,
cs



On 6/1/22 09:51, Tomasz Szewczyk wrote:
Hi,

I'm trying to make RFC2889 address learning/caching tests on poz-rare

I have bridge defined with ports:
POZ0001#show bridge 3
packet               byte
iface           fwd     phys   tx   rx   drop   tx   rx   drop grp
brprt bvi
sdn4             true   true   0     0     0         0     0 0
sdn6             true   true   0     0     0         0     0 0
sdn7             true   true   0     0     0         0     0 0


                                          packet byte
addr   iface   static   time   tx   rx   drop   tx   rx   drop

But there's no traffic.
Interfaces are configred this way:

POZ0001#sh run int sdn4
interface sdn4
   description POZ0001@31/0 -> SPIRENT@PSCN-#1
   mtu 2000
   macaddr 0031.645a.1c09
   lldp enable
   cdp enable
   bridge-group 3
   no shutdown
   no log-link-change
   exit
!

Do I need any specific configuration for that?
   I'm sending just untagged frames from the tester.

br
Tomek

--
Xavier JEANNIN
Network Dpt.
GN4-3 Network technology evolution (WP6 T1) task leader
Tél. : +33 1 5394 2042
Mob. : +33 6 3017 0963
www.renater.fr




Archive powered by MHonArc 2.6.19.

Top of Page