Rare project developers

[Alexander Gall <>]

On Fri, 3 Mar 2023 09:03:17 +0100, mc36 <> said:

> alex, yess console=ttyS0 was in the installed grub but the console was 
> silent until we appended ,115200n8

Yes, the default config does not set the baud rate. This would have
been overridden if the platform had been identified correctly. That's
what the workaround below should do.

-- 
Alex

> letsmeet.hu/astershit to see yourself? :)

> thanks,
> cs


> On 3/3/23 08:55, Alexander Gall wrote:
>> On Fri, 3 Mar 2023 08:38:45 +0100, Fr  d  ric LOUI 
>> <> said:
>> 
>>> Yesterday evening, we also spotted also that the Serial by default should 
>>> be set to 115200n8 speed configuration
>> 
>> That is already part of the installer (and the device should be
>> /dev/ttyS0 from what I see in the Asterfusion ONIE repo). However, we
>> must first be able to identify the device properly via
>> /etc/machine.conf. As a workaround, you could set
>> 
>> onie_machine=asterfusion_x312p
>> 
>> manually in /etc/machine.conf before executing onie-nos-install.
>>