Rare project developers

[Frédéric LOUI <>]

Hi Alex,

If I look at Asterfusion stratum folder the value should be:
x86-64-asterfusion-x312p-48y-t-r0

You should be able to find ONIE IDs (for other TOFINO variant here below:
https://filesender.renater.fr/?s=download&token=618af1e5-b6a2-4927-8cb6-2d64a524ff075-b6a2-4927-8cb6-2d64a524ff07

Normally cat /etc/machine.conf should provide the same result.

I hope this help
Frederic



> Le 3 mars 2023 à 09:34, Alexander Gall <> a écrit :
> 
> On Fri, 3 Mar 2023 09:13:19 +0100, Frédéric LOUI <> 
> said:
> 
>> Reboot using ONIE.
>> If you cannot select it from GUB just boot from BIOS.
> 
>> Select ONIE rescue:
> 
>> And then provide the output of:
> 
>> cat /etc/machine.conf
> 
> Yes, please. I can't download the img.gz files because I forgot what
> username/password I need for that. In any case, I'll have to ask
> Asterfusion why they are not using the proper machine id there.
> 
> -- 
> Alex
> 
>>> Le 3 mars 2023 à 09:11, mc36 <> a écrit :
>>> 
>>> okk if not then not...
>>> 
>>> from onie i dd-ed the default partitions
>>> 
>>> http://files.nop.hu/inet/barefoot/asterfusion-sda1.img.gz
>>> http://files.nop.hu/inet/barefoot/asterfusion-sda2.img.gz
>>> 
>>> go download and see yourself... it arrived with switch_os from the factory
>>> 
>>> br,
>>> cs
>>> 
>>> 
>>> 
>>> On 3/3/23 09:09, Alexander Gall wrote:
>>>> On Fri, 3 Mar 2023 09:03:17 +0100, mc36 <> said:
>>>>> alex, yess console=ttyS0 was in the installed grub but the console was 
>>>>> silent until we appended ,115200n8
>>>> Yes, the default config does not set the baud rate. This would have
>>>> been overridden if the platform had been identified correctly. That's
>>>> what the workaround below should do.
>>> 
>>> 
>>>