Rare project developers

[Alexander Gall <>]

On Fri, 3 Mar 2023 09:13:19 +0100, Frédéric LOUI <> 
said:

> Reboot using ONIE.
> If you cannot select it from GUB just boot from BIOS.

> Select ONIE rescue:

> And then provide the output of:

> cat /etc/machine.conf

Yes, please. I can't download the img.gz files because I forgot what
username/password I need for that. In any case, I'll have to ask
Asterfusion why they are not using the proper machine id there.

-- 
Alex

>> Le 3 mars 2023 à 09:11, mc36 <> a écrit :
>> 
>> okk if not then not...
>> 
>> from onie i dd-ed the default partitions
>> 
>> http://files.nop.hu/inet/barefoot/asterfusion-sda1.img.gz
>> http://files.nop.hu/inet/barefoot/asterfusion-sda2.img.gz
>> 
>> go download and see yourself... it arrived with switch_os from the factory
>> 
>> br,
>> cs
>> 
>> 
>> 
>> On 3/3/23 09:09, Alexander Gall wrote:
>>> On Fri, 3 Mar 2023 09:03:17 +0100, mc36 <> said:
>>>> alex, yess console=ttyS0 was in the installed grub but the console was 
>>>> silent until we appended ,115200n8
>>> Yes, the default config does not set the baud rate. This would have
>>> been overridden if the platform had been identified correctly. That's
>>> what the workaround below should do.
>> 
>> 
>>