Rare project developers

[Frédéric LOUI <>]

>  I concluded that this should be asterfusion-x312p,

Yes, if you could suggest to populate /etc/machine.conf to AsterFusion that 
would be ideal …

Other than that we can create a ONIE rescue
 and use "asterfusion-x312p-48y-t" or "asterfusion-x312p"

>  In any case, the value should not be "switch_os ».
True !

> Le 3 mars 2023 à 10:34, Alexander Gall <> a écrit :
> 
> On Fri, 3 Mar 2023 09:49:52 +0100, Frédéric LOUI <> 
> said:
> 
>> Hi Alex,
>> If I look at Asterfusion stratum folder the value should be:
>> x86-64-asterfusion-x312p-48y-t-r0
> 
> Almost. That's the "onie_platform", which is composed as
> ${onie_arch}-${onie_machine}-r${onie_machine_rev}. My stuff uses
> "onie_machine" to identify the system. From what I found in the
> Asterfusion Gitlab, I concluded that this should be asterfusion-x312p,
> but I might be wrong. In any case, the value should not be
> "switch_os".
> 
> -- 
> Alex
> 
>> You should be able to find ONIE IDs (for other TOFINO variant here below:
>> https://filesender.renater.fr/?s=download&token=618af1e5-b6a2-4927-8cb6-2d64a524ff075-b6a2-4927-8cb6-2d64a524ff07
> 
>> Normally cat /etc/machine.conf should provide the same result.
> 
>> I hope this help
>> Frederic
> 
> 
> 
>>> Le 3 mars 2023 à 09:34, Alexander Gall <> a écrit :
>>> 
>>> On Fri, 3 Mar 2023 09:13:19 +0100, Frédéric LOUI 
>>> <> said:
>>> 
>>>> Reboot using ONIE.
>>>> If you cannot select it from GUB just boot from BIOS.
>>> 
>>>> Select ONIE rescue:
>>> 
>>>> And then provide the output of:
>>> 
>>>> cat /etc/machine.conf
>>> 
>>> Yes, please. I can't download the img.gz files because I forgot what
>>> username/password I need for that. In any case, I'll have to ask
>>> Asterfusion why they are not using the proper machine id there.
>>> 
>>> -- 
>>> Alex
>>> 
>>>>> Le 3 mars 2023 à 09:11, mc36 <> a écrit :
>>>>> 
>>>>> okk if not then not...
>>>>> 
>>>>> from onie i dd-ed the default partitions
>>>>> 
>>>>> http://files.nop.hu/inet/barefoot/asterfusion-sda1.img.gz
>>>>> http://files.nop.hu/inet/barefoot/asterfusion-sda2.img.gz
>>>>> 
>>>>> go download and see yourself... it arrived with switch_os from the 
>>>>> factory
>>>>> 
>>>>> br,
>>>>> cs
>>>>> 
>>>>> 
>>>>> 
>>>>> On 3/3/23 09:09, Alexander Gall wrote:
>>>>>> On Fri, 3 Mar 2023 09:03:17 +0100, mc36 <> said:
>>>>>>> alex, yess console=ttyS0 was in the installed grub but the console 
>>>>>>> was silent until we appended ,115200n8
>>>>>> Yes, the default config does not set the baud rate. This would have
>>>>>> been overridden if the platform had been identified correctly. That's
>>>>>> what the workaround below should do.
>>>>> 
>>>>> 
>>>>>