Rare project developers

[Alexander Gall <>]

On Fri, 3 Mar 2023 09:49:52 +0100, Frédéric LOUI <> 
said:

> Hi Alex,
> If I look at Asterfusion stratum folder the value should be:
> x86-64-asterfusion-x312p-48y-t-r0

Almost. That's the "onie_platform", which is composed as
${onie_arch}-${onie_machine}-r${onie_machine_rev}. My stuff uses
"onie_machine" to identify the system. From what I found in the
Asterfusion Gitlab, I concluded that this should be asterfusion-x312p,
but I might be wrong. In any case, the value should not be
"switch_os".

-- 
Alex

> You should be able to find ONIE IDs (for other TOFINO variant here below:
> https://filesender.renater.fr/?s=download&token=618af1e5-b6a2-4927-8cb6-2d64a524ff075-b6a2-4927-8cb6-2d64a524ff07

> Normally cat /etc/machine.conf should provide the same result.

> I hope this help
> Frederic



>> Le 3 mars 2023 à 09:34, Alexander Gall <> a écrit :
>> 
>> On Fri, 3 Mar 2023 09:13:19 +0100, Frédéric LOUI 
>> <> said:
>> 
>>> Reboot using ONIE.
>>> If you cannot select it from GUB just boot from BIOS.
>> 
>>> Select ONIE rescue:
>> 
>>> And then provide the output of:
>> 
>>> cat /etc/machine.conf
>> 
>> Yes, please. I can't download the img.gz files because I forgot what
>> username/password I need for that. In any case, I'll have to ask
>> Asterfusion why they are not using the proper machine id there.
>> 
>> -- 
>> Alex
>> 
>>>> Le 3 mars 2023 à 09:11, mc36 <> a écrit :
>>>> 
>>>> okk if not then not...
>>>> 
>>>> from onie i dd-ed the default partitions
>>>> 
>>>> http://files.nop.hu/inet/barefoot/asterfusion-sda1.img.gz
>>>> http://files.nop.hu/inet/barefoot/asterfusion-sda2.img.gz
>>>> 
>>>> go download and see yourself... it arrived with switch_os from the 
>>>> factory
>>>> 
>>>> br,
>>>> cs
>>>> 
>>>> 
>>>> 
>>>> On 3/3/23 09:09, Alexander Gall wrote:
>>>>> On Fri, 3 Mar 2023 09:03:17 +0100, mc36 <> said:
>>>>>> alex, yess console=ttyS0 was in the installed grub but the console was 
>>>>>> silent until we appended ,115200n8
>>>>> Yes, the default config does not set the baud rate. This would have
>>>>> been overridden if the platform had been identified correctly. That's
>>>>> what the workaround below should do.
>>>> 
>>>> 
>>>>