Skip to Content.
Sympa Menu

rare-dev - Re: [rare-dev] Fwd: https://filesender.renater.fr/?s=download&token=618af1e5-b6a2-4927-8cb6-2d64a524ff07

Subject: Rare project developers

List archive

Re: [rare-dev] Fwd: https://filesender.renater.fr/?s=download&token=618af1e5-b6a2-4927-8cb6-2d64a524ff07


Chronological Thread 
  • From: Alexander Gall <>
  • To: mc36 <>
  • Cc: "" <>, Frédéric LOUI <>
  • Subject: Re: [rare-dev] Fwd: https://filesender.renater.fr/?s=download&token=618af1e5-b6a2-4927-8cb6-2d64a524ff07
  • Date: Thu, 2 Mar 2023 15:08:54 +0100

On Thu, 2 Mar 2023 15:02:57 +0100, mc36 <> said:

> not yet there as usb-boot stuck at grub prompt detecting the serial
> console...
> now the upf (5g) vc then some hacking for the sdn congress then
> i'll try to dd the flash from onie to a big enough external usb hdd or
> something....

> let's postpone the together hacking to tomorrow afternoon when you see fit?

Ok. Maybe the box @CERN will also be ready by then.

--
Alex

> thanks,
> cs

> On 3/2/23 14:58, Alexander Gall wrote:
>> On Thu, 2 Mar 2023 14:46:45 +0100, mc36 <> said:
>>
>>> hi,
>>> On 3/2/23 14:40, Alexander Gall wrote:
>>>>
>>>>> then a debian install to partition #2 keeping the onie in place
>>>>
>>>> ONIE is on partition 2 (partition 1 is the EFI system
>>>> partition). Don't overwrite it :)
>>>>
>>
>>> thanks for noticing, i'll study that carefully and screenshot to
>>> album.nop.hu when im there... :)
>>
>>> and finally no worries, i'll dd the ssd before doing anything destructive
>>> anyway to be able to restore anytime, as i did to my bf2556....
>>
>>> (also you'll find the disk image at my nas at
>>> files.nop.[hu|dn42]/inet/barefoot/ )
>>
>> I'd expect that only partitions 1 and 2 exist on a new device and they
>> can always be restored with a fresh "ONIE embed".
>>
>>>>> then creating the 3rd partition for the rare installation and
>>>>
>>>>> here comes you to help me hand-extract the below .bin to that 3rd,
>>>>
>>>>> much like we did to my bf2556 together about a year or two ago....
>>>>
>>>>> hmmm?
>>>>
>>>> I'd prefer if you could simply use the ONIE installer directly. You
>>>> can always overwrite that with your debian installation if you want
>>>> to.
>>>>
>>
>>> so the thing is that normally i do run nix yess but sometimes when i
>>> cannot wait for a whole reoptimize-recompile cycle,
>>
>>> i would reserve the possibility to boot my regular debian and do on-box
>>> development within 1-2 minutes for the new tofino.bin :)
>>
>>> afterwards i surely fetch your builds when im done, but you know
>>> trial-and-fail development all the way here :)))
>>
>> I understand. But this testing will also involve multiple ONIE
>> re-installs to get everything right. I would suggest to make the
>> dual-boot setup only once the BSP is fully supported, if that's ok :)
>>



Archive powered by MHonArc 2.6.24.

Top of Page