RARE user and assistance email list

[Alexander Gall <>]

Hi David

On Tue, 21 Feb 2023 08:47:29 +0100, David Franco <> said:

> Good morning,
> I tried updating the ONIE and then reinstalling the ONL image but I 
> still get the same error.

Just to make sure: did you also perform the "ONIE embed" step?

> I send you the output of /blkid /command.

/dev/sda1 is missing there. That should be the EFI system partition,
so something is not right. Can you please also show me the partition
table, e.g. with "fdisk -l /dev/sda"?

-- 
Alex

> David

> El 20/02/2023 a las 17:30, Alexander Gall escribió:
>> On Mon, 20 Feb 2023 17:24:54 +0100, Frédéric 
>> LOUI<>  said:
>> 
>>>> Actually, I did build an ONIE updater/recovery image for the Netberg
>>>> (here:http://hydra.nix.net.switch.ch/RARE/netberg/) with EFI enabled
>>>> last year. Maybe that was to address this exact problem, I don't
>>>> remember.
>>> Yes ! I remember now that ONIE had to be updated...
>>>> @David, you could give that a try and re-install ONIE on the
>>>> device. To do that, select "ONIE update" from GRUB, then
>>> @David, please try Alex suggestion, I have the feeling that this is the 
>>> key to your problem :)
>> Right, I just found the email exchange I had with Marcos about
>> this. One more thing: after the onie-self-update you'll also have to
>> embedd ONIE again afterwards. So:
>> 
>> * First Boot with "ONIE update", perform onie-self-update
>> * Reboot, select "ONIE embed"
>> * Reboot (done automatically after embed) and perform the RARE ONIE 
>> installation
>> 
>> Hope this works :)
>> 
> -- 
> David Franco
> I2T Research Group, Department of Communications Engineering
> University of the Basque Country (UPV/EHU), Spain
> Tel: +34 946 018 251