Skip to Content.
Sympa Menu

rare-users - Re: [RARE-users] Freertr/RARE installation on the Aurora 710

Subject: RARE user and assistance email list

List archive

Re: [RARE-users] Freertr/RARE installation on the Aurora 710


Chronological Thread 
  • From: David Franco <>
  • To:
  • Cc: Asier Atutxa <>, JORGE SASIAIN <>
  • Subject: Re: [RARE-users] Freertr/RARE installation on the Aurora 710
  • Date: Mon, 20 Feb 2023 14:07:37 +0100

Hi Alex, all,

I used the new installer and I got the following error (please find the in-line image)...

Any ideas of how should I proceed?

David


I just created a new installer for the current master branch. @David:
if you use
http://hydra.nix.net.switch.ch/RARE/releases/pre-2/onie-installer-release-1-134-g388c27f.bin
you don't have to run the "install-latest" command (but you can always
use it at any time to keep in sync with the newest changes).

--
Alex

On Thu, 16 Feb 2023 10:53:29 +0100, Frédéric LOUI said:

Thanks @Alex ! @David, feel free to ping me should need passive assistance via VC :)

Le 16 févr. 2023 à 10:45, Alexander Gall a écrit :
Hi David

On Thu, 16 Feb 2023 10:19:53 +0100, David Franco said:

We recently received an Aurora 710
(https://netbergtw.com/products/aurora-710/) P4 switch and we would like
to configure it with freertr/RARE (our plan is to make this switch part
of the GP4L).

Can I follow the same steps as for the Wedge100BF
(https://docs.freertr.org/guides/installation/wedge100bf32/onie-nos-install/)
to install the prebuild ONL image? Has anyone installed freertr/RARE in
the Aurora 710?

In principle, yes, the instllation procedure is the same for all
supported platforms (i.e. there is a single ONIE installer for all of
them). However, the official installer for release 1 is a bit old and
does not yet support the Aurora 710. Please use http://hydra.nix.net.switch.ch/RARE/releases/pre-2/onie-installer-release-1-79-g4834c09.bin instead.

That pre-release is missing a few things for this platform that were
fixed later on but the installation should work. Once installed, you
can upgrade to the latest version either by executing (as root)

# release-manager --install-latest

from a shell (make sure it's a login shell or add /nix/var/nix/profiles/RARE/bin to PATH) or from the freertr prompt
with

# tna-install-latest

--
Alex
-- 
David Franco
I2T Research Group, Department of Communications Engineering
University of the Basque Country (UPV/EHU), Spain
Tel: +34 946 018 251



Archive powered by MHonArc 2.6.24.

Top of Page