Skip to Content.
Sympa Menu

rare-users - Re: [RARE-users] [rare-dev] [freertr] freeRouter install error

Subject: RARE user and assistance email list

List archive

Re: [RARE-users] [rare-dev] [freertr] freeRouter install error


Chronological Thread 
    < Chronological >      < Thread >
  • From: mc36 <>
  • To: Gabriel Tetzner <>,
  • Cc: ,
  • Subject: Re: [RARE-users] [rare-dev] [freertr] freeRouter install error
  • Date: Fri, 6 Jan 2023 14:05:18 +0100
hi,
okk, thanks! it's just a hypervisor only as far as i know... so the who is
the dhcp server then?
thanks,
cs

On 1/6/23 12:43, Gabriel Tetzner wrote:
Hi Csaba,

The hypervisor/environmen is VMware vSphere.

Em qui., 5 de jan. de 2023 s 01:22, Gabriel Tetzner via groups.io <http://groups.io>
< <>>
escreveu:

Hi,

So Csaba, specifically this machine is part of a set of machines that we
contracted with a team participating in the RENaaS project.

I don't have much information about the environment in question, I can
only access the machines, so I sent an email to their technical team and am
waiting for a response.

I found this dhcp error really strange, but I will be sure to reply as
soon as possible.

Sincerely, Gabriel Tetzner Menegueti.

Em qui., 5 de jan. de 2023 s 00:44, mc36 < <>>
escreveu:

hi,
good to know, thanks... at least you have the packets... :)
yess, feel free to point the static default to the gw...
btw what hypervisor/environment we're in?
just asking because this dhcp issue is weirdo,
i would like to dig into it if i have the chance...
thanks,
cs

On 1/5/23 03:53, Gabriel Tetzner wrote:
> Hi Csaba,
>
> It seems that setting a static IP works, it ping to a gateway too,
now I must point all traffic to the gateway using a static route to have
external connectivity?
>
> Em qua., 4 de jan. de 2023 s 22:40, mc36 < <>
< <>>> escreveu:
>
> hmmm... i seee much more packets in linux compared to
freerouter...
> but at least you have some in freerouter which indicates a
working pcaping...
> so you're not getting ip address... does it work if you set
up a static ip?
> (some environments require "ipv4 dhcp-client early" or "ipv4
dhcp-client broadcast")
> br,
> cs
>
> On 1/5/23 02:01, Gabriel Tetzner wrote:
> > Hi Csaba,
> >
> > image.png
> >
> > /rtr$ /sbin/ifconfig
> > ens32:
flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500
> > inet 213.150.x.x
netmask 255.255.255.240 broadcast 213.150.x.x
> > ether 00:50:56:83:5c:31
txqueuelen 1000 (Ethernet)
> > RX packets 177017
bytes 27061872 (25.8 MiB)
> > RX errors 0
dropped 0 overruns 0 frame 0
> > TX packets 146738
bytes 27609510 (26.3 MiB)
> > TX errors 0
dropped 0 overruns 0 carrier 0 collisions 0
> >
> > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65535
> > inet 127.0.0.1
netmask 255.0.0.0
> > inet6 ::1 prefixlen 128
scopeid 0x10<host>
> > loop txqueuelen
1000 (Local Loopback)
> > RX packets 271549
bytes 42672972 (40.6 MiB)
> > RX errors 0
dropped 0 overruns 0 frame 0
> > TX packets 271549
bytes 42672972 (40.6 MiB)
> > TX errors 0
dropped 0 overruns 0 carrier 0 collisions 0
> >
> > tap20001: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
mtu 1500
> > inet 10.255.255.1
netmask 255.255.255.0 broadcast 0.0.0.0
> > inet6
2001:db8:ffff:ffff:200:4eff:fe2c:4e2b prefixlen 64 scopeid 0x0<global>
> > inet6 fe80::200:4eff:fe2c:4e2b
prefixlen 64 scopeid 0x20<link>
> > ether 00:00:4e:2c:4e:2b
txqueuelen 1000 (Ethernet)
> > RX packets 147
bytes 11476 (11.2 KiB)
> > RX errors 0
dropped 0 overruns 0 frame 0
> > TX packets 202
bytes 16987 (16.5 KiB)
> > TX errors 0
dropped 0 overruns 0 carrier 0 collisions 0
> >
> > image.png
> >
> > I think it might also be a compilation error or
something, but I haven't yet detected where that error would be.
> >
> > Em qua., 4 de jan. de 2023 s 15:23, mc36 < <>
< <>> < <> <
<>>>> escreveu:
> >
> > hi,
> > then that was a mis-guess from my side...
> > assuming the default config after
installation,
> > http://www.freertr.org/install-sw.txt
<http://www.freertr.org/install-sw.txt> <http://www.freertr.org/install-sw.txt
<http://www.freertr.org/install-sw.txt>>
<http://www.freertr.org/install-sw.txt <http://www.freertr.org/install-sw.txt>
<http://www.freertr.org/install-sw.txt <http://www.freertr.org/install-sw.txt>>>
> > could you please add "tcp2vrf 2323 inet 23"
to /rtr/rtr-hw.txt
> > then sudo systemctl restart rtr then telnet
127.0.0.1 2323
> > it should give you the freerouter console, here i'm
interested about "show interfaces"
> > also drop me the /sbin/ifconfig just to check
the mac addresses and packet counters against the two...
> > also "sho proc ext" could be interesting,
just in case if there is still a pcapint issue in the background...
> > thanks,
> > cs
> >
> >
> > On 1/4/23 19:14, Gabriel Tetzner wrote:
> > > Hi Csaba,
> > >
> > > I did the installation following the sid
update recommendation,
> > >
> > > It seems that pcapInt works, but does not
activate with the default operating system interface.
> > >
> > > Em ter., 3 de jan. de 2023 s 11:50, mc36 <
<> < <>> < <>
< <>>> < <>
< <>> < <>
> < <>>>>> escreveu:
> > >
> > > hi,
> > > my guess then is you
forgot to upgrade to debian-sid...
> > > can you verify if after
you rebooted, /rtr/pcapInt.bin is runnable?
> > > i bet you it'll error
out with a glibc version mismatch...
> > > br,
> > > cs
> > >
> > >
> > > On 1/3/23 15:41, Gabriel
Tetzner wrote:
> > > > Hello Csaba,
> > > >
> > > > Indeed when you
reboot freeRouter works, but the interface is not taken.
> > > > So interface
ethernet1 does not receive debian's dhcp ip and has no external c onnectivity.
> > > > Would I have to
reinstall by counting c.sh again?
> > > >
> > > > Em ter., 3 de jan. de 2023
s 01:06, mc36 < <> < <>>
<
<> < <>>> <
<> < <>>
> < <> < <>>>>
< <> < <>> <
<> < <>>> <
<> < <>>
> > < <> <
<>>>>>> escreveu:
> > > >
> > > >
hi,
> > > >
what you're seeing here is the following script running:
> > > >
https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh

<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>
>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>>
> >
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>
>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>>>
> > >
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh

<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>
>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>>
> >
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>
>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh
<https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>>>>
> > > >
the main idea here is to kill all the linux networking and enable freerouter...
> > > >
dont worry, your vm dont have nor netplan nor nmtui but the rest should work...
> > > >
just reboot the vm and you should be up and running with freerouter...
> > > >
br,
> > > >
cs
> > > >
> > > >
> > > >
On 1/2/23 23:10, Gabriel Tetzner wrote:
> > > >
> Hi all,
> > > >
>
> > > >
> I am trying to install freeRouter on a Debian virtual machine, I followed all
the steps but when I get to the end
of the script installation
> the following
> > error appears:
> > > >
>
> > > >
> image.png
> > > >
>
> > > >
> This error stops freeRouter and does not take control of debian's network
interface.
> > > >
>
> > > >
> Can someone help me?
> > > >
> > >
> > >
> >
>
>
>
>
>

_._,_._,_

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#920) <https://groups.io/g/freertr/message/920> |
Reply To Group

<>
| Reply To Sender

<>
| Mute This Topic
<https://groups.io/mt/96056106/7122407> | New Topic
<https://groups.io/g/freertr/post>
Your Subscription <https://groups.io/g/freertr/editsub/7122407> | Contact Group Owner
<> | Unsubscribe <https://groups.io/g/freertr/unsub>
[
<>]

_._,_._,_


Archive powered by MHonArc 2.6.19.

Top of Page