RARE user and assistance email list

[Gabriel Tetzner <>]

Hi,

So Csaba, specifically this machine is part of a set of machines that we contracted with a team participating in the RENaaS project.

I don't have much information about the environment in question, I can only access the machines, so I sent an email to their technical team and am waiting for a response.

I found this dhcp error really strange, but I will be sure to reply as soon as possible.

Sincerely, Gabriel Tetzner Menegueti.

Em qui., 5 de jan. de 2023 às 00:44, mc36 <> escreveu:

hi,
good to know, thanks... at least you have the packets... :)
yess, feel free to point the static default to the gw...
btw what hypervisor/environment we're in?
just asking because this dhcp issue is weirdo,
i would like to dig into it if i have the chance...
thanks,
cs

On 1/5/23 03:53, Gabriel Tetzner wrote:
> Hi Csaba,
>
> It seems that setting a static IP works, it ping to a gateway too, now I must point all traffic to the gateway using a static route to have external connectivity?
>
> Em qua., 4 de jan. de 2023   s 22:40, mc36 < <mailto:>> escreveu:
>
>     hmmm... i seee much more packets in linux compared to freerouter...
>     but at least you have some in freerouter which indicates a working pcaping...
>     so you're not getting ip address... does it work if you set up a static ip?
>     (some environments require "ipv4 dhcp-client early" or "ipv4 dhcp-client broadcast")
>     br,
>     cs
>
>     On 1/5/23 02:01, Gabriel Tetzner wrote:
>      > Hi Csaba,
>      >
>      > image.png
>      >
>      > /rtr$ /sbin/ifconfig
>      > ens32: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST>     mtu 1500
>      >                     inet 213.150.x.x     netmask 255.255.255.240     broadcast 213.150.x.x
>      >                     ether 00:50:56:83:5c:31     txqueuelen 1000     (Ethernet)
>      >                     RX packets 177017     bytes 27061872 (25.8 MiB)
>      >                     RX errors 0     dropped 0     overruns 0     frame 0
>      >                     TX packets 146738     bytes 27609510 (26.3 MiB)
>      >                     TX errors 0     dropped 0 overruns 0     carrier 0     collisions 0
>      >
>      > lo: flags=73<UP,LOOPBACK,RUNNING>     mtu 65535
>      >                     inet 127.0.0.1     netmask 255.0.0.0
>      >                     inet6 ::1     prefixlen 128     scopeid 0x10<host>
>      >                     loop     txqueuelen 1000     (Local Loopback)
>      >                     RX packets 271549     bytes 42672972 (40.6 MiB)
>      >                     RX errors 0     dropped 0     overruns 0     frame 0
>      >                     TX packets 271549     bytes 42672972 (40.6 MiB)
>      >                     TX errors 0     dropped 0 overruns 0     carrier 0     collisions 0
>      >
>      > tap20001: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>     mtu 1500
>      >                     inet 10.255.255.1     netmask 255.255.255.0     broadcast 0.0.0.0
>      >                     inet6 2001:db8:ffff:ffff:200:4eff:fe2c:4e2b     prefixlen 64     scopeid 0x0<global>
>      >                     inet6 fe80::200:4eff:fe2c:4e2b     prefixlen 64     scopeid 0x20<link>
>      >                     ether 00:00:4e:2c:4e:2b     txqueuelen 1000     (Ethernet)
>      >                     RX packets 147     bytes 11476 (11.2 KiB)
>      >                     RX errors 0     dropped 0     overruns 0     frame 0
>      >                     TX packets 202     bytes 16987 (16.5 KiB)
>      >                     TX errors 0     dropped 0 overruns 0     carrier 0     collisions 0
>      >
>      > image.png
>      >
>      > I think it might also be a compilation error or something, but I haven't yet detected where that error would be.
>      >
>      > Em qua., 4 de jan. de 2023     s 15:23, mc36 < <mailto:> <mailto: <mailto:>>> escreveu:
>      >
>      >        hi,
>      >        then that was a mis-guess from my side...
>      >        assuming the default config after installation,
>      > http://www.freertr.org/install-sw.txt <http://www.freertr.org/install-sw.txt> <http://www.freertr.org/install-sw.txt <http://www.freertr.org/install-sw.txt>>
>      >        could you please add "tcp2vrf 2323 inet 23" to /rtr/rtr-hw.txt
>      >        then sudo systemctl restart rtr then telnet 127.0.0.1 2323
>      >        it should give you the freerouter console, here i'm interested about "show interfaces"
>      >        also drop me the /sbin/ifconfig just to check the mac addresses and packet counters against the two...
>      >        also "sho proc ext" could be interesting, just in case if there is still a pcapint issue in the background...
>      >        thanks,
>      >        cs
>      >
>      >
>      >        On 1/4/23 19:14, Gabriel Tetzner wrote:
>      >         > Hi Csaba,
>      >         >
>      >         > I did the installation following the sid update recommendation,
>      >         >
>      >         > It seems that pcapInt works, but does not activate with the default operating system interface.
>      >         >
>      >         > Em ter., 3 de jan. de 2023        s 11:50, mc36 < <mailto:> <mailto: <mailto:>> <mailto: <mailto:> <mailto:
>     <mailto:>>>> escreveu:
>      >         >
>      >         >            hi,
>      >         >            my guess then is you forgot to upgrade to debian-sid...
>      >         >            can you verify if after you rebooted, /rtr/pcapInt.bin is runnable?
>      >         >            i bet you it'll error out with a glibc version mismatch...
>      >         >            br,
>      >         >            cs
>      >         >
>      >         >
>      >         >            On 1/3/23 15:41, Gabriel Tetzner wrote:
>      >         >              > Hello Csaba,
>      >         >              >
>      >         >              > Indeed when you reboot freeRouter works, but the interface is not taken.
>      >         >              > So interface ethernet1 does not receive debian's dhcp ip and has no external c onnectivity.
>      >         >              > Would I have to reinstall by counting c.sh again?
>      >         >              >
>      >         >              > Em ter., 3 de jan. de 2023            s 01:06, mc36 < <mailto:> <mailto: <mailto:>> <mailto: <mailto:>
>     <mailto: <mailto:>>> <mailto: <mailto:> <mailto: <mailto:>> <mailto: <mailto:>
>      >        <mailto: <mailto:>>>>> escreveu:
>      >         >              >
>      >         >              >                  hi,
>      >         >              >                  what you're seeing here is the following script running:
>      >         >              > https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
>     <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>
>      >        <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
>     <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>>
>      >         >            <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
>     <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>
>      >        <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
>     <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>>>
>      >         >              >                  the main idea here is to kill all the linux networking and enable freerouter...
>      >         >              >                  dont worry, your vm dont have nor netplan nor nmtui but the rest should work...
>      >         >              >                  just reboot the vm and you should be up and running with freerouter...
>      >         >              >                  br,
>      >         >              >                  cs
>      >         >              >
>      >         >              >
>      >         >              >                  On 1/2/23 23:10, Gabriel Tetzner wrote:
>      >         >              >                     > Hi all,
>      >         >              >                     >
>      >         >              >                     > I am trying to install freeRouter on a Debian virtual machine, I followed all the steps but when I get to the end of the script installation
>     the following
>      >        error appears:
>      >         >              >                     >
>      >         >              >                     > image.png
>      >         >              >                     >
>      >         >              >                     > This error stops freeRouter and does not take control of debian's network interface.
>      >         >              >                     >
>      >         >              >                     > Can someone help me?
>      >         >              >
>      >         >
>      >         >
>      >
>
>
>     -=-=-=-=-=-=-=-=-=-=-=-
>     Groups.io Links: You receive all messages sent to this group.
>     View/Reply Online (#915): https://groups.io/g/freertr/message/915 <https://groups.io/g/freertr/message/915>
>     Mute This Topic: https://groups.io/mt/96056106/7122407 <https://groups.io/mt/96056106/7122407>
>     Group Owner: <mailto:>
>     Unsubscribe: https://groups.io/g/freertr/unsub <https://groups.io/g/freertr/unsub> [ <mailto:>]
>     -=-=-=-=-=-=-=-=-=-=-=-
>
>