RARE user and assistance email list

[mc36 <>]

hi,
then that was a mis-guess from my side...
assuming the default config after installation,
http://www.freertr.org/install-sw.txt
could you please add "tcp2vrf 2323 inet 23" to /rtr/rtr-hw.txt
then sudo systemctl restart rtr then telnet 127.0.0.1 2323
it should give you the freerouter console, here i'm interested about "show 
interfaces"
also drop me the /sbin/ifconfig just to check the mac addresses and packet 
counters against the two...
also "sho proc ext" could be interesting, just in case if there is still a 
pcapint issue in the background...
thanks,
cs


On 1/4/23 19:14, Gabriel Tetzner wrote:
> Hi Csaba,
>
> I did the installation following the sid update recommendation,
>
> It seems that pcapInt works, but does not activate with the default operating 
> system interface.
>
> Em ter., 3 de jan. de 2023   s 11:50, mc36 < <>> 
> escreveu:
>
>     hi,
>     my guess then is you forgot to upgrade to debian-sid...
>     can you verify if after you rebooted, /rtr/pcapInt.bin is runnable?
>     i bet you it'll error out with a glibc version mismatch...
>     br,
>     cs
>
>
>     On 1/3/23 15:41, Gabriel Tetzner wrote:
>      > Hello Csaba,
>      >
>      > Indeed when you reboot freeRouter works, but the interface is not 
> taken.
>      > So interface ethernet1 does not receive debian's dhcp ip and has no 
> external connectivity.
>      > Would I have to reinstall by counting c.sh again?
>      >
>      > Em ter., 3 de jan. de 2023     s 01:06, mc36 < <> 
> < <>>> escreveu:
>      >
>      >        hi,
>      >        what you're seeing here is the following script running:
>      > https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh 
> <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
>     <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh 
> <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>
>      >        the main idea here is to kill all the linux networking and 
> enable freerouter...
>      >        dont worry, your vm dont have nor netplan nor nmtui but the 
> rest should work...
>      >        just reboot the vm and you should be up and running with 
> freerouter...
>      >        br,
>      >        cs
>      >
>      >
>      >        On 1/2/23 23:10, Gabriel Tetzner wrote:
>      >         > Hi all,
>      >         >
>      >         > I am trying to install freeRouter on a Debian virtual 
> machine, I followed all the steps but when I get to the end of the script 
> installation the following error appears:
>      >         >
>      >         > image.png
>      >         >
>      >         > This error stops freeRouter and does not take control of 
> debian's network interface.
>      >         >
>      >         > Can someone help me?
>      > 
>
> _._,_._,_
> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> Groups.io Links:
>
> You receive all messages sent to this group.
>
> View/Reply Online (#909) <https://groups.io/g/freertr/message/909> | Reply To Group 
> <> | Reply To Sender 
> <> | Mute This Topic 
> <https://groups.io/mt/96056106/6006518> | New Topic <https://groups.io/g/freertr/post>
> Your Subscription <https://groups.io/g/freertr/editsub/6006518> | Contact Group Owner 
> <> | Unsubscribe <https://groups.io/g/freertr/unsub> 
> []
>
> _._,_._,_