Rare project developers

[mc36 <>]

frederic stop micro-managing us!


On 3/6/23 22:09, Frederic LOUI wrote:
> Please use this command that Alex gave you:
> onie-self-update 
> http://hydra.nix.net.switch.ch/RARE/asterfusion/onie-updater-x86_64-asterfusion_x312p-r0
>
> (Yours is using the wrong image )
>
> Le  6 mars 2023 21:46, mc36 <> a   crit  :
>
>     ONIE:/ #
>     ONIE:/ # onie-self-update 
> http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
>     Notice:   Invalid TLV header found.   Using default contents.
>     Notice:   Invalid TLV checksum found.   Using default contents.
>     Info: Attempting 
> http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
>  ...
>     Connecting to files.mchome.nop.hu (10.10.10.10:80)
>     installer                       100% 
> |**********************************************************************| 
> 27840k   0:00:00 ETA
>     Failure: ONIE Update: Invalid ONIE update image format.
>     ONIE:/ #
>
>
>     On 3/6/23 21:33, Alexander Gall wrote:
>      >
>      > Sorry, I assumed you had done this before :)
>      >
>      > Just to reiterate what Frederic has said: you can either boot into
>      > "ONIE update" and at the prompt execute
>      >
>      > ONIE# onie-self-update 
> http://hydra.nix.net.switch.ch/RARE/asterfusion/onie-updater-x86_64-asterfusion_x312p-r0
>      >
>      > then after the reboot select "ONIE embed". The system will then reboot
>      > automatically one more time and then you can use onie-nos-install with
>      > the RARE installer.
>      >
>      > Or you can write
>      > 
> http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
>      > to a USB stick, boot from it and select "ONIE embed" from there.
>      >
>      > Both methods should lead to the same result namely replacing the
>      > existing ONIE with a new version that should be branded for that
>      > specific hardware.
>      >
>      > --
>      > Alex
>      >
>      > On Mon, 6 Mar 2023 20:59:40 +0100, mc36 <> said:
>      >
>      >> i c... so what command should i execute with the link?
>      >> thanks,
>      >> cs
>      >
>      >> On 3/6/23 20:42, Frederic LOUI wrote:
>      >>> Hi Csaba,
>      >>>
>      >>> The image that Alex has provided you is not RARE NOS image. It is 
> ONIE upgrade with latest greatest ONIE firmware from AsterFusion. In order to install 
> it. Reboot your
>     machine and
>      >>> choose ONIE embed. (B4 burn the full     image in USB key)
>      >>>
>      >>> This upgrade in order to have /etc/machine.conf set properly.
>      >>>
>      >>> Or second method, boot on ONiE and use the onie updater with the 
> onie update binary that Alex provided
>      >>>
>      >>> It like in openwrt there is an upgrade image and there is a full 
> ONIE upgrade. You'll have to use different ways if you install one or the other.
>      >>>
>      >>> I tested both (upgrade and clean slate install) and amboth method 
> worked well.
>      >>>
>      >>> As I'm a bit old school, i like to burn an USB key, boot from it, 
> and select ONIE embed option. At that time this will normally upgrade ONiE partition
>      >>>
>      >>> Hope this helps
>      >>> Frederic
>      >>>
>      >>>
>      >>> Le   6 mars 2023 20:16, mc36 <> a     crit   :
>      >>>
>      >>> something is missing from this image as it's 28mb whereas the rare 
> builds are above 500mb?
>      >>>
>      >>> ONIE:/ #
>      >>> ONIE:/ # onie-nos-install 
> http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
>      >>> Notice:     Invalid TLV header found.     Using default contents.
>      >>> Notice:     Invalid TLV checksum found.     Using default contents.
>      >>> Info: Attempting 
> http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
>  ...
>      >>> Connecting to files.mchome.nop.hu (10.10.10.10:80)
>      >>> installer                                             100% 
> |**********************************************************************| 27840k     
> 0:00:00 ETA
>      >>> /var/tmp/installer: line 1: syntax error: unexpected "|"
>      >>> Failure: Unable to install image: 
> http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
>      >>> ONIE:/ #
>      >>> ONIE:/ #
>      >>> ONIE:/ #
>      >>>
>      >>>
>      >>>
>      >>> On 3/6/23 14:21, Alexander Gall wrote:
>      >>>> Hi csaba
>      >>>>
>      >>>> I have built an ONIE recovery image for the X312P:
>      >>>> 
> http://hydra.nix.net.switch.ch/RARE/asterfusion/onie-recovery-x86_64-asterfusion_x312p-r0.iso
>      >>>>
>      >>>> Can you please try to re-install your box with that? It should then 
> be
>      >>>> properly branded :) Before that you can also try to use the updater
>      >>>> (onie-updater-x86_64-asterfusion_x312p-r0). If that works, you don't
>      >>>> need to perform a full recovery from USB.
>      >>>>
>      >>>> Once that ONIE version is embedded on the box, you can check if
>      >>>> "onie_machine" is properly set in /etc/machine.conf.     If so, 
> please
>      >>>> give my ONIE installer anther try (I just built a new version
>      >>>> 
> http://hydra.nix.net.switch.ch/RARE/asterfusion/onie-installer.bin). Then
>      >>>> I can resume to complete work on the BSP.
>      >>>>
>      >>>
>      >>>