Rare project developers

[Frederic LOUI <>]

Hi Csaba,

The image that Alex has provided you is not RARE NOS image. It is ONIE upgrade with latest greatest ONIE firmware from AsterFusion. In order to install it. Reboot your machine and choose ONIE embed. (B4 burn the full  image in USB key)

This upgrade in order to have /etc/machine.conf set properly.

Or second method, boot on ONiE and use the onie updater with the onie update binary that Alex provided 

It like in openwrt there is an upgrade image and there is a full ONIE upgrade. You'll have to use different ways if you install one or the other.

I tested both (upgrade and clean slate install) and amboth method worked well.

As I'm a bit old school, i like to burn an USB key, boot from it, and select ONIE embed option. At that time this will normally upgrade ONiE partition

Hope this helps

Frederic 

Le 6 mars 2023 20:16, mc36 <> a écrit :

something is missing from this image as it's 28mb whereas the rare builds are above 500mb?

ONIE:/ #
ONIE:/ # onie-nos-install http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
Notice:  Invalid TLV header found.  Using default contents.
Notice:  Invalid TLV checksum found.  Using default contents.
Info: Attempting http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso ...
Connecting to files.mchome.nop.hu (10.10.10.10:80)
installer            100% |**********************************************************************| 27840k  0:00:00 ETA
/var/tmp/installer: line 1: syntax error: unexpected "|"
Failure: Unable to install image: http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
ONIE:/ #
ONIE:/ #
ONIE:/ #



On 3/6/23 14:21, Alexander Gall wrote:
> Hi csaba
>
> I have built an ONIE recovery image for the X312P:
> http://hydra.nix.net.switch.ch/RARE/asterfusion/onie-recovery-x86_64-asterfusion_x312p-r0.iso
>
> Can you please try to re-install your box with that? It should then be
> properly branded :) Before that you can also try to use the updater
> (onie-updater-x86_64-asterfusion_x312p-r0). If that works, you don't
> need to perform a full recovery from USB.
>
> Once that ONIE version is embedded on the box, you can check if
> "onie_machine" is properly set in /etc/machine.conf.  If so, please
> give my ONIE installer anther try (I just built a new version
> http://hydra.nix.net.switch.ch/RARE/asterfusion/onie-installer.bin). Then
> I can resume to complete work on the BSP.
>