Rare project developers

[mc36 <>]

ONIE:/ #
ONIE:/ # onie-self-update 
http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
Notice:  Invalid TLV header found.  Using default contents.
Notice:  Invalid TLV checksum found.  Using default contents.
Info: Attempting 
http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
 ...
Connecting to files.mchome.nop.hu (10.10.10.10:80)
installer            100% 
|**********************************************************************| 
27840k  0:00:00 ETA
Failure: ONIE Update: Invalid ONIE update image format.
ONIE:/ #


On 3/6/23 21:33, Alexander Gall wrote:
> Sorry, I assumed you had done this before :)
>
> Just to reiterate what Frederic has said: you can either boot into
> "ONIE update" and at the prompt execute
>
> ONIE# onie-self-update 
> http://hydra.nix.net.switch.ch/RARE/asterfusion/onie-updater-x86_64-asterfusion_x312p-r0
>
> then after the reboot select "ONIE embed". The system will then reboot
> automatically one more time and then you can use onie-nos-install with
> the RARE installer.
>
> Or you can write
> http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
> to a USB stick, boot from it and select "ONIE embed" from there.
>
> Both methods should lead to the same result namely replacing the
> existing ONIE with a new version that should be branded for that
> specific hardware.
>
> --
> Alex
>
> On Mon, 6 Mar 2023 20:59:40 +0100, mc36 <> said:
>
> > i c... so what command should i execute with the link?
> > thanks,
> > cs
>
> > On 3/6/23 20:42, Frederic LOUI wrote:
> > > Hi Csaba,
> > >
> > > The image that Alex has provided you is not RARE NOS image. It is ONIE 
> > > upgrade with latest greatest ONIE firmware from AsterFusion. In order to 
> > > install it. Reboot your machine and
> > > choose ONIE embed. (B4 burn the full   image in USB key)
> > >
> > > This upgrade in order to have /etc/machine.conf set properly.
> > >
> > > Or second method, boot on ONiE and use the onie updater with the onie update 
> > > binary that Alex provided
> > >
> > > It like in openwrt there is an upgrade image and there is a full ONIE 
> > > upgrade. You'll have to use different ways if you install one or the other.
> > >
> > > I tested both (upgrade and clean slate install) and amboth method worked well.
> > >
> > > As I'm a bit old school, i like to burn an USB key, boot from it, and select 
> > > ONIE embed option. At that time this will normally upgrade ONiE partition
> > >
> > > Hope this helps
> > > Frederic
> > >
> > >
> > > Le  6 mars 2023 20:16, mc36 <> a   crit  :
> > >
> > > something is missing from this image as it's 28mb whereas the rare builds are 
> > > above 500mb?
> > >
> > > ONIE:/ #
> > > ONIE:/ # onie-nos-install 
> > > http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
> > > Notice:   Invalid TLV header found.   Using default contents.
> > > Notice:   Invalid TLV checksum found.   Using default contents.
> > > Info: Attempting 
> > > http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
> > >  ...
> > > Connecting to files.mchome.nop.hu (10.10.10.10:80)
> > > installer                       100% 
> > > |**********************************************************************| 
> > > 27840k   0:00:00 ETA
> > > /var/tmp/installer: line 1: syntax error: unexpected "|"
> > > Failure: Unable to install image: 
> > > http://files.mchome.nop.hu/inet/barefoot/onie-recovery-x86_64-asterfusion_x312p-20230306.iso
> > > ONIE:/ #
> > > ONIE:/ #
> > > ONIE:/ #
> > >
> > >
> > >
> > > On 3/6/23 14:21, Alexander Gall wrote:
> > > > Hi csaba
> > > >
> > > > I have built an ONIE recovery image for the X312P:
> > > > http://hydra.nix.net.switch.ch/RARE/asterfusion/onie-recovery-x86_64-asterfusion_x312p-r0.iso
> > > >
> > > > Can you please try to re-install your box with that? It should then be
> > > > properly branded :) Before that you can also try to use the updater
> > > > (onie-updater-x86_64-asterfusion_x312p-r0). If that works, you don't
> > > > need to perform a full recovery from USB.
> > > >
> > > > Once that ONIE version is embedded on the box, you can check if
> > > > "onie_machine" is properly set in /etc/machine.conf.   If so, please
> > > > give my ONIE installer anther try (I just built a new version
> > > > http://hydra.nix.net.switch.ch/RARE/asterfusion/onie-installer.bin). Then
> > > > I can resume to complete work on the BSP.