Rare project developers

[mc36 <>]

hi,

On 6/14/22 12:33, Alexander Gall wrote:
> Never mind. I was using an older version of freertr, namely the one I
> used in the demo of running RARE on the model. Remember that the ping
> worked back then? That was because of this behaviour that freertr
> considered the port to be up. Presumably, this demo would no longer
> work with the current version.
well, so this "start in down state" changed recently, carmen reported about a 
thing...
so on the older jars, it's normal, that you noticed something else... :)

> So can you now please check whether the oper status of your ports on
> the model is "UP" (seen from the UCLI) when you expect it to be ? This
> is really my main concern for now :)
i see on my model vm running sde990 after java -Xmx512m -jar rtr.jar test 
tester p4lang-rout001 other p4lang301.ini wait

bf-sde.pm> show
-----+----+---+----+-------+----+--+--+---+---+---+--------+----------------+----------------+-
PORT |MAC |D_P|P/PT|SPEED  |FEC |AN|KR|RDY|ADM|OPR|LPBK    |FRAMES RX       
|FRAMES TX       |E
-----+----+---+----+-------+----+--+--+---+---+---+--------+----------------+----------------+-
1/0  |15/0|  0|0/ 0|10G    |NONE|Au|Au|YES|DIS|DWN|  NONE  |               0| 
              0|
1/1  |15/1|  1|0/ 1|10G    |NONE|Au|Au|YES|ENB|UP |  NONE  |             171| 
            171|*
1/2  |15/2|  2|0/ 2|10G    |NONE|Au|Au|YES|ENB|UP |  NONE  |             171| 
            171|*
1/3  |15/3|  3|0/ 3|10G    |NONE|Au|Au|YES|ENB|UP |  NONE  |            2392| 
           2392|*
2/0  |14/0|  4|0/ 4|10G    |NONE|Au|Au|YES|ENB|UP |  NONE  |            2392| 
           2392|*
2/1  |14/1|  5|0/ 5|10G    |NONE|Au|Au|YES|DIS|DWN|  NONE  |               0| 
              0|
2/2  |14/2|  6|0/ 6|10G    |NONE|Au|Au|YES|DIS|DWN|  NONE  |               0| 
              0|
2/3  |14/3|  7|0/ 7|10G    |NONE|Au|Au|YES|DIS|DWN|  NONE  |               0| 
              0|
3/0  |13/0|  8|0/ 8|10G    |NONE|Au|Au|YES|DIS|DWN|  NONE  |               0| 
              0|
3/1  |13/1|  9|0/ 9|10G    |NONE|Au|Au|YES|DIS|DWN|  NONE  |               0| 
              0|
3/2  |13/2| 10|0/10|10G    |NONE|Au|Au|YES|DIS|DWN|  NONE  |               0| 
              0|
3/3  |13/3| 11|0/11|10G    |NONE|Au|Au|YES|DIS|DWN|  NONE  |               0| 
              0|
4/0  |12/0| 12|0/12|10G    |NONE|Au|Au|YES|DIS|DWN|  NONE  |               0| 
              0|

r1#show interfaces psummary
interface  state  tx       rx       drop
loopback0  up     9        0        0
loopback9  up     0        0        0
ethernet1  up     8600     8620     2
ethernet2  up     202      190      0
sdn1       up     51+171   48+171   0+0
sdn2       up     51+171   48+171   0+0
sdn3       up     50+2392  47+2392  0+0
sdn4       up     50+2392  47+2392  0+0

r1#


thanks,
cs