Rare project developers

[mc36 <>]

hi,
the later two, enp1s0 entered promisc means to me that your system is up & 
running...
one thing to note regarding how freerouter takes over the serial console is 
that,
it uses 9600-8-n-1 (as most cisco devices) so after you see the above 
mentioned
messages, you should change to that speed in your minicom/picocom/whatever...
let me know if this helps to recover at least the serial console...
an other thing i spotted is that only 2 of your 4 nics come up indicating
to me that they must have changed names in the newer kernel of sid so once
you recovered the serial console, we should not stop there.... :)
br,
cs



On 5/19/22 11:23, Edgard da Cunha Pontes wrote:
> Hi all,
>
> After some unsuccessful attempts to install RARE/freeRtr on Luna D-125, I 
> decided to come here for help.
> I made an installation tutorial (step by step) that maybe can help to 
> understand the problem.
> https://docs.google.com/document/d/1jrXgkYxFyIiKOjQ-tS8bKF-eyoHN4MHVrD9gaX8gPho/edit?usp=sharing 
> <https://docs.google.com/document/d/1jrXgkYxFyIiKOjQ-tS8bKF-eyoHN4MHVrD9gaX8gPho/edit?usp=sharing>
> The installation ends with a success message, but when restarting the OS, the system 
> "freezes".
>
> Include the "initcall_debug ignore_loglevel" parameters at system boot, to 
> analyze how far it goes.  These are the latest messages:
> [    42.038700] calling   nf_nat_init+0x0/0x1000 [nf_nat] @ 508
> [    42.044453] initcall nf_nat_init+0x0/0x1000 [nf_nat] returned 0 after 162 
> usecs
> [    42.064865] calling   nf_conncount_modinit+0x0/0x1000 [nf_conncount] @ 508
> [    42.071886] initcall nf_conncount_modinit+0x0/0x1000 [nf_conncount] 
> returned 0 after 102 usecs
> [    42.084514] device enp0s20f1 entered promiscuous mode
> [    42.101402] calling   nsh_init_module+0x0/0x1000 [nsh] @ 508
> [    42.107239] initcall nsh_init_module+0x0/0x1000 [nsh] returned 0 after 2 
> usecs
> [    42.199975] calling   dp_init+0x0/0x107 [openvswitch] @ 508
> [    42.205665] openvswitch: Open vSwitch switching datapath
> [    42.494589] initcall dp_init+0x0/0x107 [openvswitch] returned 0 after 
> 282151 usecs
> [    42.525521] device enp1s0 entered promiscuous mode
> [    42.642649] device enp2s0 entered promiscuous mode
>
> I hope someone has had a similar problem and can shed some "light".