RARE user and assistance email list

[mc36 <>]

hi,

POZ0001#show config-differences
server p4lang p4
 export-bridge 10
 exit

POZ0001#


btw, recently we added a patch-panel mode, which is, a local cross-connect 
between local (sub)interfaces...
this one is control-plane-less, that is, no mac learning at all... 
specifically for xavier use case...
wouldn't you try that one instead?
the config knob in freerouter is connect xyz / side1 / side2 ...
but the dataplane needs to be recompiled with it enabled....




explanation for the config change:

this is what programmed to the hardware:

bfrt.bf_router_RENATER_PEERING_L2.pipe.ig_ctl.ig_ctl_bridge> dump
-----------------------------------------------------------> dump()
----- tbl_bridge_target Dump Start -----
Default Entry:
Entry data (action : ig_ctl.ig_ctl_bridge.act_bridge_punt):
    $COUNTER_SPEC_BYTES            : 0
    $COUNTER_SPEC_PKTS             : 0

Table pipe.ig_ctl.ig_ctl_bridge.tbl_bridge_target has no entries.
----- tbl_bridge_target Dump End -----

----- tbl_bridge_learn Dump Start -----
Default Entry:
Entry data (action : ig_ctl.ig_ctl_bridge.act_bridge_miss):
    $COUNTER_SPEC_BYTES            : 22433221299440
    $COUNTER_SPEC_PKTS             : 175259113004

Table pipe.ig_ctl.ig_ctl_bridge.tbl_bridge_learn has no entries.
----- tbl_bridge_learn Dump End -----


bfrt.bf_router_RENATER_PEERING_L2.pipe.ig_ctl.ig_ctl_bridge>



that is, nothing... you missed the export-bridge knob:



after the above mentioned config, this is what we get:

bfrt.bf_router_RENATER_PEERING_L2.pipe.ig_ctl.ig_ctl_bridge> dump
-----------------------------------------------------------> dump()
----- tbl_bridge_target Dump Start -----
Default Entry:
Entry data (action : ig_ctl.ig_ctl_bridge.act_bridge_punt):
    $COUNTER_SPEC_BYTES            : 39708897904
    $COUNTER_SPEC_PKTS             : 310224308

Entry 0:
Entry key:
    hdr.ethernet.dst_mac_addr      : 0x001094000003
    ig_md.bridge_id                : 0x000A
Entry data (action : ig_ctl.ig_ctl_bridge.act_set_bridge_out):
    port                           : 0x030
    $COUNTER_SPEC_BYTES            : 0
    $COUNTER_SPEC_PKTS             : 0

----- tbl_bridge_target Dump End -----

----- tbl_bridge_learn Dump Start -----
Default Entry:
Entry data (action : ig_ctl.ig_ctl_bridge.act_bridge_miss):
    $COUNTER_SPEC_BYTES            : 22524069163312
    $COUNTER_SPEC_PKTS             : 175968858741

Entry 0:
Entry key:
    hdr.ethernet.src_mac_addr      : 0x001094000003
    ig_md.bridge_id                : 0x000A
Entry data (action : ig_ctl.ig_ctl_bridge.act_set_bridge_port):
    $COUNTER_SPEC_BYTES            : 39546125312
    $COUNTER_SPEC_PKTS             : 308952654

----- tbl_bridge_learn Dump End -----


bfrt.bf_router_RENATER_PEERING_L2.pipe.ig_ctl.ig_ctl_bridge>



br,
cs





On 8/4/22 11:47, Tomasz Szewczyk wrote:
> Hi,
>
> I'm sorry for bothering you but I have tricky problem.
>
> I have bridge 10 on 3 interfaces (sdn4, 6 and 7) with mac-learn:
> POZ0001#sh br 10
>                                                                               
>             packet                                                            
>                          byte
> iface                     fwd         phys     tx                             
>     rx                                 drop     tx rx                         
>                 drop     grp
> brprt bvi
> sdn4                         true     true     115972138     137657118     0  
>                12988879456 15417597216     0
> sdn6                         true     true     115933307     139375186     0  
>                12984530384 15610020832     0
> sdn7                         true     true     277032305     12               
>                   0                 31027618272 1344                          
>        0
>
>
>                                                                               
>                                                                               
>       packet byte
> addr                                             iface     static     time    
>                  tx                         rx                                
>  drop tx                                 rx                                   
>       drop
> 0010.9400.0003     sdn6         false         00:00:23     6                  
>            139375204     0 672                             15610022960     0
> 0010.9400.0004     sdn7         false         00:01:23     3844264     6      
>                                0 430557568     672                            
>          0
> 0010.9400.0005     sdn4         false         00:00:23     0                  
>            137657118     0 0                                     15417597216  
>    0
>
> When I'm sending traffic to MAC 0010.9400.0004 it looks like the traffic is 
> switched like broadcast - or with broadcast like performance - 8Mpps TX but 
> just ~70k pps on egress.
>
> How I can debug that?
>
> br
> Tomek