RARE user and assistance email list

[mc36 <>]

On 7/4/22 13:34, Fr  d  ric LOUI wrote:
> Hi,
>
> > the interface up in freertr is a known issue, first reported by carmen, and 
> > fixed already, try upgrading before doing anything else...
> I   m in an air gapped environment. I   ll try Alex   s standalone upgrade
okkk


> > the dataplane not populated thing is normal, imho you saw such some other 
> > dataplane says messages like 'trying to set invalid port combination' or so?
> ...
> info servP4langConn.doReports:servP4lang.java:2821 dataplane said: 
> BfForwarder - Error in adding port [256], inconsistent parameters:[100,2,1,0]
>    
>
>
> I reproduce the issue. And yes it reported the message above. But when I 
> configure the parameters above [100,2,1,0] the port goes UP
yess, that's what the bug is about... it was well discussed in depth on the 
-dev lists with alex,
and beforehand with carmen... tldl: the ports started in up in freerouter, 
but in down in the tofino...
and, if the port never come up, then it resulted in the inconsistency...

br,
cs




> Anyway thanks for your feedback,
> FIrst thing first: upgrade RARE/freeRtr NOS
>
> Thanks !
> Frederic
>
> > Le 4 juil. 2022    12:35, mc36 <> a   crit :
> >
> > hi,
> > the interface up in freertr is a known issue, first reported by carmen, and 
> > fixed already, try upgrading before doing anything else...
> > the dataplane not populated thing is normal, imho you saw such some other 
> > dataplane says messages like 'trying to set invalid port combination' or so?
> > br,
> > cs
> >
> >
> > On 7/4/22 11:27,  wrote:
> > > Hi !
> > > I   m staging a RARE/freeRtr in California :)
> > > I   ve an observation WRT bringing up interface:
> > > interface sdn30
> > >   lldp enable
> > >   vrf forwarding CORE
> > >   ipv4 address 10.10.30.1 255.255.255.0
> > >   no shutdown
> > >   no log-link-change
> > >   exit
> > > When applying:
> > > server p4lang p4
> > >   ...
> > >   export-port sdn30 280 100 2 1 0
> > >   ...
> > >   exit
> > > I see on the debug server p4 [rx/tx/err] the following message:
> > > ...
> > > debug servP4langConn.doReports:servP4lang.java:2288 rx: dataplane-say 
> > > Attempting to set administrative state for inactive port [280]
> > > info servP4langConn.doReports:servP4lang.java:2821 dataplane said: Attempting 
> > > to set administrative state for inactive port [280]
> > > debug servP4langConn.doReports:servP4lang.java:2288 rx: dataplane-say 
> > > Attempting to set mtu for inactive port [280]
> > > info servP4langConn.doReports:servP4lang.java:2821 dataplane said: Attempting 
> > > to set mtu for inactive port [280]
> > >    When I check bfshell the interface is _NOT_ enabled at the dataplane level:
> > > In the output 30/0 entry is missing.
> > > 1/0  |46/0|260|2/ 4|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          520552| 
> > >          526822|
> > > 2/0  |44/0|268|2/12|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          525122| 
> > >          529331|
> > > 3/0  |42/0|276|2/20|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |           35023| 
> > >           39428|
> > > 4/0  |40/0|284|2/28|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          286704| 
> > >           39368|
> > > 29/0 |52/0|272|2/16|100G   | RS |Au|Au|YES|ENB|UP |  NONE  |              34| 
> > >              39|
> > > 32/0 |50/0|264|2/ 8|100G   |NONE|Ds|Au|YES|ENB|DWN|  NONE  |               0| 
> > >               0|
> > > In freeRtr the interface is showed as "UP"
> > > In order to bring it up I had to enable it manually at the dataplane level.
> > > bf-sde.pm> show
> > > -----+----+---+----+-------+----+--+--+---+---+---+--------+----------------+----------------+-
> > > PORT |MAC |D_P|P/PT|SPEED  |FEC |AN|KR|RDY|ADM|OPR|LPBK    |FRAMES RX       
> > > |FRAMES TX       |E
> > > -----+----+---+----+-------+----+--+--+---+---+---+--------+----------------+----------------+-
> > > 1/0  |46/0|260|2/ 4|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          520562| 
> > >          526831|
> > > 2/0  |44/0|268|2/12|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          525133| 
> > >          529338|
> > > 3/0  |42/0|276|2/20|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |           35031| 
> > >           39434|
> > > 4/0  |40/0|284|2/28|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          286790| 
> > >           39374|
> > > 29/0 |52/0|272|2/16|100G   | RS |Au|Au|YES|ENB|UP |  NONE  |              41| 
> > >              47|
> > > 30/0 |54/0|280|2/24|100G   | RS |Au|Au|YES|ENB|DWN|  NONE  |               0| 
> > >               0|
> > > 32/0 |50/0|264|2/ 8|100G   |NONE|Ds|Au|YES|ENB|DWN|  NONE  |               0| 
> > >               0|
> > > After enabled manually the port appears.
> > > (In this case it is still down but this will be tuned at a later stage)
> > > At that moment the port is showed as "DOWN"
> > > The switch is a Wedge100BF 32QS.
> > > All the best,
> > > Frederic
> > > -=-=-=-=-=-=-=-=-=-=-=-
> > > Groups.io Links: You receive all messages sent to this group.
> > > View/Reply Online (#363): https://groups.io/g/freertr/message/363
> > > Mute This Topic: https://groups.io/mt/92161635/6006518
> > > Group Owner: 
> > > Unsubscribe: https://groups.io/g/freertr/unsub []
> > > -=-=-=-=-=-=-=-=-=-=-=-