RARE user and assistance email list

[Frédéric LOUI <>]

Hi,

> the interface up in freertr is a known issue, first reported by carmen, and 
> fixed already, try upgrading before doing anything else...
I’m in an air gapped environment. I’ll try Alex’s standalone upgrade

> the dataplane not populated thing is normal, imho you saw such some other 
> dataplane says messages like 'trying to set invalid port combination' or so?
...
info servP4langConn.doReports:servP4lang.java:2821 dataplane said: 
BfForwarder - Error in adding port [256], inconsistent parameters:[100,2,1,0]
…


I reproduce the issue. And yes it reported the message above. But when I 
configure the parameters above [100,2,1,0] the port goes UP

Anyway thanks for your feedback,
FIrst thing first: upgrade RARE/freeRtr NOS

Thanks !
Frederic

> Le 4 juil. 2022 à 12:35, mc36 <> a écrit :
> 
> hi,
> the interface up in freertr is a known issue, first reported by carmen, and 
> fixed already, try upgrading before doing anything else...
> the dataplane not populated thing is normal, imho you saw such some other 
> dataplane says messages like 'trying to set invalid port combination' or so?
> br,
> cs
> 
> 
> On 7/4/22 11:27,  wrote:
>> Hi !
>> I   m staging a RARE/freeRtr in California :)
>> I   ve an observation WRT bringing up interface:
>> interface sdn30
>>  lldp enable
>>  vrf forwarding CORE
>>  ipv4 address 10.10.30.1 255.255.255.0
>>  no shutdown
>>  no log-link-change
>>  exit
>> When applying:
>> server p4lang p4
>>  ...
>>  export-port sdn30 280 100 2 1 0
>>  ...
>>  exit
>> I see on the debug server p4 [rx/tx/err] the following message:
>> ...
>> debug servP4langConn.doReports:servP4lang.java:2288 rx: dataplane-say 
>> Attempting to set administrative state for inactive port [280]
>> info servP4langConn.doReports:servP4lang.java:2821 dataplane said: 
>> Attempting to set administrative state for inactive port [280]
>> debug servP4langConn.doReports:servP4lang.java:2288 rx: dataplane-say 
>> Attempting to set mtu for inactive port [280]
>> info servP4langConn.doReports:servP4lang.java:2821 dataplane said: 
>> Attempting to set mtu for inactive port [280]
>>   When I check bfshell the interface is _NOT_ enabled at the dataplane 
>> level:
>> In the output 30/0 entry is missing.
>> 1/0  |46/0|260|2/ 4|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          
>> 520552|          526822|
>> 2/0  |44/0|268|2/12|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          
>> 525122|          529331|
>> 3/0  |42/0|276|2/20|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |           
>> 35023|           39428|
>> 4/0  |40/0|284|2/28|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          
>> 286704|           39368|
>> 29/0 |52/0|272|2/16|100G   | RS |Au|Au|YES|ENB|UP |  NONE  |              
>> 34|              39|
>> 32/0 |50/0|264|2/ 8|100G   |NONE|Ds|Au|YES|ENB|DWN|  NONE  |               
>> 0|               0|
>> In freeRtr the interface is showed as "UP"
>> In order to bring it up I had to enable it manually at the dataplane level.
>> bf-sde.pm> show
>> -----+----+---+----+-------+----+--+--+---+---+---+--------+----------------+----------------+-
>> PORT |MAC |D_P|P/PT|SPEED  |FEC |AN|KR|RDY|ADM|OPR|LPBK    |FRAMES RX      
>>  |FRAMES TX       |E
>> -----+----+---+----+-------+----+--+--+---+---+---+--------+----------------+----------------+-
>> 1/0  |46/0|260|2/ 4|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          
>> 520562|          526831|
>> 2/0  |44/0|268|2/12|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          
>> 525133|          529338|
>> 3/0  |42/0|276|2/20|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |           
>> 35031|           39434|
>> 4/0  |40/0|284|2/28|100G   |NONE|Ds|Au|YES|ENB|UP |  NONE  |          
>> 286790|           39374|
>> 29/0 |52/0|272|2/16|100G   | RS |Au|Au|YES|ENB|UP |  NONE  |              
>> 41|              47|
>> 30/0 |54/0|280|2/24|100G   | RS |Au|Au|YES|ENB|DWN|  NONE  |               
>> 0|               0|
>> 32/0 |50/0|264|2/ 8|100G   |NONE|Ds|Au|YES|ENB|DWN|  NONE  |               
>> 0|               0|
>> After enabled manually the port appears.
>> (In this case it is still down but this will be tuned at a later stage)
>> At that moment the port is showed as "DOWN"
>> The switch is a Wedge100BF 32QS.
>> All the best,
>> Frederic
>> -=-=-=-=-=-=-=-=-=-=-=-
>> Groups.io Links: You receive all messages sent to this group.
>> View/Reply Online (#363): https://groups.io/g/freertr/message/363
>> Mute This Topic: https://groups.io/mt/92161635/6006518
>> Group Owner: 
>> Unsubscribe: https://groups.io/g/freertr/unsub []
>> -=-=-=-=-=-=-=-=-=-=-=-