Skip to Content.
Sympa Menu

rare-dev - Re: [rare-dev] Asterfusion recovery image

Subject: Rare project developers

List archive

Re: [rare-dev] Asterfusion recovery image


Chronological Thread 
  • From: Alexander Gall <>
  • To: mc36 <>
  • Cc: <>, Frederic LOUI <>
  • Subject: Re: [rare-dev] Asterfusion recovery image
  • Date: Wed, 8 Mar 2023 14:13:09 +0100

On Wed, 8 Mar 2023 13:08:26 +0100, mc36 <> said:

> usb boot does not work in bios.

Meaning what exactly? You can't select it as the boot device or the
actual boot somehow fails? We'll have to ask Asterfusion how this is
supposed to work.

--
Alex

> On 3/8/23 11:35, Alexander Gall wrote:
>> On Wed, 8 Mar 2023 11:15:04 +0100, mc36 <> said:
>>
>>> ONIE:/ #
>>> ONIE:/ # onie-self-update
>>> http://files.mchome.nop.hu/inet/barefoot/onie-updater-x86_64-asterfusion_x312p-r0-20230307.bi
>>> n -f
>>> Notice: Invalid TLV header found. Using default contents.
>>> Notice: Invalid TLV checksum found. Using default contents.
>>> Info: Attempting
>>> http://files.mchome.nop.hu/inet/barefoot/onie-updater-x86_64-asterfusion_x312p-r0-20230307.bin
>>> ...
>>> Connecting to files.mchome.nop.hu (10.10.10.10:80)
>>> installer 100%
>>> |**********************************************************************|
>>> 12101k 0:00:00 ETA
>>> Verifying image checksum ... OK.
>>> Preparing image archive ... OK.
>>> ONIE: Version : 2020.11-dirty
>>> ONIE: Architecture : x86_64
>>> ONIE: Machine : asterfusion_x312p
>>> ONIE: Machine Rev : 0
>>> ONIE: Config Version: 1
>>> ONIE: Build Date : 2023-03-06T12:48+00:00
>>
>> At least the "-f" hack worked :)
>>
>>> Installing ONIE on: /dev/sda
>>> ERROR: Problems accessing sys_eeprom
>>> Notice: Invalid TLV header found. Using default contents.
>>> Notice: Invalid TLV checksum found. Using default contents.
>>> ERROR: Cannot open I2C device
>>
>> But now it's hopeless, since the unbranded ONIE doesn't know how to
>> access the I2C devices.
>>
>>> Failure: Unable to install image:
>>> http://files.mchome.nop.hu/inet/barefoot/onie-updater-x86_64-asterfusion_x312p-r0-20230307.bin
>>> ONIE:/ #
>>> ONIE:/ #
>>> ONIE:/ #
>>
>> So let's forget about the self-update then (and I have learned that
>> one cannot change the "branding" of an installed ONIE via this
>> mechanism). The only way to proceed is via the recovery image and USB,
>> AFAICT. What exactly was the problem with booting from USB?
>>



Archive powered by MHonArc 2.6.24.

Top of Page