Rare project developers

[Alexander Gall <>]

On Fri, 3 Mar 2023 09:09:30 +0100, Alexander Gall <> said:

> On Fri, 3 Mar 2023 09:03:17 +0100, mc36 <> said:
>> alex, yess console=ttyS0 was in the installed grub but the console was 
>> silent until we appended ,115200n8

> Yes, the default config does not set the baud rate. This would have
> been overridden if the platform had been identified correctly. That's
> what the workaround below should do.

Oops, just realized that the config from which I created that
installer actually uses 57600n8 for asterfusion by mistake
(https://github.com/alexandergall/bf-sde-nixpkgs/blob/asterfusion/bf-sde/bf-platforms/properties.nix),
so the workaround would actually not work either :(

Anyway, I'll fix that.

-- 
Alex

> -- 
> Alex

>> letsmeet.hu/astershit to see yourself? :)

>> thanks,
>> cs


>> On 3/3/23 08:55, Alexander Gall wrote:
>>> On Fri, 3 Mar 2023 08:38:45 +0100, Fr  d  ric LOUI 
>>> <> said:
>>> 
>>>> Yesterday evening, we also spotted also that the Serial by default 
>>>> should be set to 115200n8 speed configuration
>>> 
>>> That is already part of the installer (and the device should be
>>> /dev/ttyS0 from what I see in the Asterfusion ONIE repo). However, we
>>> must first be able to identify the device properly via
>>> /etc/machine.conf. As a workaround, you could set
>>> 
>>> onie_machine=asterfusion_x312p
>>> 
>>> manually in /etc/machine.conf before executing onie-nos-install.
>>> 
-- 
Alexander Gall, Network

SWITCH
Werdstrasse 2, P.O. Box, 8021 Zurich, Switzerland
phone +41 44 268 15 15, direct +41 44 268 15 22
https://switch.ch https://swit.ch/linkedin  https://swit.ch/twitter