Rare project developers

[mc36 <>]

hmmm... i seee much more packets in linux compared to freerouter...
but at least you have some in freerouter which indicates a working pcaping...
so you're not getting ip address... does it work if you set up a static ip?
(some environments require "ipv4 dhcp-client early" or "ipv4 dhcp-client 
broadcast")
br,
cs

On 1/5/23 02:01, Gabriel Tetzner wrote:
> Hi Csaba,
>
> image.png
>
> /rtr$ /sbin/ifconfig
> ens32: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST>   mtu 1500
>              inet 213.150.x.x   netmask 255.255.255.240   broadcast 
> 213.150.x.x
>              ether 00:50:56:83:5c:31   txqueuelen 1000   (Ethernet)
>              RX packets 177017   bytes 27061872 (25.8 MiB)
>              RX errors 0   dropped 0   overruns 0   frame 0
>              TX packets 146738   bytes 27609510 (26.3 MiB)
>              TX errors 0   dropped 0 overruns 0   carrier 0   collisions 0
>
> lo: flags=73<UP,LOOPBACK,RUNNING>   mtu 65535
>              inet 127.0.0.1   netmask 255.0.0.0
>              inet6 ::1   prefixlen 128   scopeid 0x10<host>
>              loop   txqueuelen 1000   (Local Loopback)
>              RX packets 271549   bytes 42672972 (40.6 MiB)
>              RX errors 0   dropped 0   overruns 0   frame 0
>              TX packets 271549   bytes 42672972 (40.6 MiB)
>              TX errors 0   dropped 0 overruns 0   carrier 0   collisions 0
>
> tap20001: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>   mtu 1500
>              inet 10.255.255.1   netmask 255.255.255.0   broadcast 0.0.0.0
>              inet6 2001:db8:ffff:ffff:200:4eff:fe2c:4e2b   prefixlen 64   scopeid 
> 0x0<global>
>              inet6 fe80::200:4eff:fe2c:4e2b   prefixlen 64   scopeid 
> 0x20<link>
>              ether 00:00:4e:2c:4e:2b   txqueuelen 1000   (Ethernet)
>              RX packets 147   bytes 11476 (11.2 KiB)
>              RX errors 0   dropped 0   overruns 0   frame 0
>              TX packets 202   bytes 16987 (16.5 KiB)
>              TX errors 0   dropped 0 overruns 0   carrier 0   collisions 0
>
> image.png
>
> I think it might also be a compilation error or something, but I haven't yet 
> detected where that error would be.
>
> Em qua., 4 de jan. de 2023   s 15:23, mc36 < <>> 
> escreveu:
>
>     hi,
>     then that was a mis-guess from my side...
>     assuming the default config after installation,
>     http://www.freertr.org/install-sw.txt 
> <http://www.freertr.org/install-sw.txt>
>     could you please add "tcp2vrf 2323 inet 23" to /rtr/rtr-hw.txt
>     then sudo systemctl restart rtr then telnet 127.0.0.1 2323
>     it should give you the freerouter console, here i'm interested about "show 
> interfaces"
>     also drop me the /sbin/ifconfig just to check the mac addresses and 
> packet counters against the two...
>     also "sho proc ext" could be interesting, just in case if there is still 
> a pcapint issue in the background...
>     thanks,
>     cs
>
>
>     On 1/4/23 19:14, Gabriel Tetzner wrote:
>      > Hi Csaba,
>      >
>      > I did the installation following the sid update recommendation,
>      >
>      > It seems that pcapInt works, but does not activate with the default 
> operating system interface.
>      >
>      > Em ter., 3 de jan. de 2023     s 11:50, mc36 < <> 
> < <>>> escreveu:
>      >
>      >        hi,
>      >        my guess then is you forgot to upgrade to debian-sid...
>      >        can you verify if after you rebooted, /rtr/pcapInt.bin is 
> runnable?
>      >        i bet you it'll error out with a glibc version mismatch...
>      >        br,
>      >        cs
>      >
>      >
>      >        On 1/3/23 15:41, Gabriel Tetzner wrote:
>      >         > Hello Csaba,
>      >         >
>      >         > Indeed when you reboot freeRouter works, but the interface 
> is not taken.
>      >         > So interface ethernet1 does not receive debian's dhcp ip and 
> has no external connectivity.
>      >         > Would I have to reinstall by counting c.sh again?
>      >         >
>      >         > Em ter., 3 de jan. de 2023        s 01:06, mc36 < <> 
> < <>> < <> <
>     <>>>> escreveu:
>      >         >
>      >         >            hi,
>      >         >            what you're seeing here is the following script 
> running:
>      >         > 
> https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh 
> <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
>     <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh 
> <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>
>      >        
> <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh 
> <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
>     <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh 
> <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>>
>      >         >            the main idea here is to kill all the linux 
> networking and enable freerouter...
>      >         >            dont worry, your vm dont have nor netplan nor 
> nmtui but the rest should work...
>      >         >            just reboot the vm and you should be up and 
> running with freerouter...
>      >         >            br,
>      >         >            cs
>      >         >
>      >         >
>      >         >            On 1/2/23 23:10, Gabriel Tetzner wrote:
>      >         >              > Hi all,
>      >         >              >
>      >         >              > I am trying to install freeRouter on a Debian 
> virtual machine, I followed all the steps but when I get to the end of the script 
> installation the following
>     error appears:
>      >         >              >
>      >         >              > image.png
>      >         >              >
>      >         >              > This error stops freeRouter and does not take 
> control of debian's network interface.
>      >         >              >
>      >         >              > Can someone help me?
>      >         >
>      >
>      > _._,_._,_
>      >
>     
> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>      > Groups.io Links:
>      >
>      > You receive all messages sent to this group.
>      >
>      > View/Reply Online (#909) <https://groups.io/g/freertr/message/909 
> <https://groups.io/g/freertr/message/909>> | Reply To Group
>      > < 
> <>?subject=Re:%20Re%3A%20%5Brare-dev%5D%20%5Bfreertr%5D%20%5BRARE-users%5D%20freeRouter%20install%20error>
>  | Reply To Sender
>      > <
>     
> <>?subject=Private:%20Re:%20Re%3A%20%5Brare-dev%5D%20%5Bfreertr%5D%20%5BRARE-users%5D%20freeRouter%20install%20error>
>  | Mute This Topic
>      > <https://groups.io/mt/96056106/6006518 <https://groups.io/mt/96056106/6006518>> | 
> New Topic <https://groups.io/g/freertr/post <https://groups.io/g/freertr/post>>
>      > Your Subscription <https://groups.io/g/freertr/editsub/6006518 
> <https://groups.io/g/freertr/editsub/6006518>> | Contact Group Owner 
> <
>     <>> | Unsubscribe <https://groups.io/g/freertr/unsub 
> <https://groups.io/g/freertr/unsub>> [ <>]
>      >
>      > _._,_._,_