Rare project developers

[Gabriel Tetzner <>]

Hi Csaba,

/rtr$ /sbin/ifconfig
ens32: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST>  mtu 1500
        inet 213.150.x.x  netmask 255.255.255.240  broadcast 213.150.x.x
        ether 00:50:56:83:5c:31  txqueuelen 1000  (Ethernet)
        RX packets 177017  bytes 27061872 (25.8 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 146738  bytes 27609510 (26.3 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65535
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 271549  bytes 42672972 (40.6 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 271549  bytes 42672972 (40.6 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

tap20001: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.255.255.1  netmask 255.255.255.0  broadcast 0.0.0.0
        inet6 2001:db8:ffff:ffff:200:4eff:fe2c:4e2b  prefixlen 64  scopeid 0x0<global>
        inet6 fe80::200:4eff:fe2c:4e2b  prefixlen 64  scopeid 0x20<link>
        ether 00:00:4e:2c:4e:2b  txqueuelen 1000  (Ethernet)
        RX packets 147  bytes 11476 (11.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 202  bytes 16987 (16.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

I think it might also be a compilation error or something, but I haven't yet detected where that error would be.

Em qua., 4 de jan. de 2023 às 15:23, mc36 <> escreveu:

hi,
then that was a mis-guess from my side...
assuming the default config after installation,
http://www.freertr.org/install-sw.txt
could you please add "tcp2vrf 2323 inet 23" to /rtr/rtr-hw.txt
then sudo systemctl restart rtr then telnet 127.0.0.1 2323
it should give you the freerouter console, here i'm interested about "show interfaces"
also drop me the /sbin/ifconfig just to check the mac addresses and packet counters against the two...
also "sho proc ext" could be interesting, just in case if there is still a pcapint issue in the background...
thanks,
cs


On 1/4/23 19:14, Gabriel Tetzner wrote:
> Hi Csaba,
>
> I did the installation following the sid update recommendation,
>
> It seems that pcapInt works, but does not activate with the default operating system interface.
>
> Em ter., 3 de jan. de 2023   s 11:50, mc36 < <mailto:>> escreveu:
>
>     hi,
>     my guess then is you forgot to upgrade to debian-sid...
>     can you verify if after you rebooted, /rtr/pcapInt.bin is runnable?
>     i bet you it'll error out with a glibc version mismatch...
>     br,
>     cs
>
>
>     On 1/3/23 15:41, Gabriel Tetzner wrote:
>      > Hello Csaba,
>      >
>      > Indeed when you reboot freeRouter works, but the interface is not taken.
>      > So interface ethernet1 does not receive debian's dhcp ip and has no external connectivity.
>      > Would I have to reinstall by counting c.sh again?
>      >
>      > Em ter., 3 de jan. de 2023     s 01:06, mc36 < <mailto:> <mailto: <mailto:>>> escreveu:
>      >
>      >        hi,
>      >        what you're seeing here is the following script running:
>      > https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>
>     <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh <https://github.com/rare-freertr/freeRtr/blob/master/misc/service/c.sh>>
>      >        the main idea here is to kill all the linux networking and enable freerouter...
>      >        dont worry, your vm dont have nor netplan nor nmtui but the rest should work...
>      >        just reboot the vm and you should be up and running with freerouter...
>      >        br,
>      >        cs
>      >
>      >
>      >        On 1/2/23 23:10, Gabriel Tetzner wrote:
>      >         > Hi all,
>      >         >
>      >         > I am trying to install freeRouter on a Debian virtual machine, I followed all the steps but when I get to the end of the script installation the following error appears:
>      >         >
>      >         > image.png
>      >         >
>      >         > This error stops freeRouter and does not take control of debian's network interface.
>      >         >
>      >         > Can someone help me?
>      >
>
> _._,_._,_
> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> Groups.io Links:
>
> You receive all messages sent to this group.
>
> View/Reply Online (#909) <https://groups.io/g/freertr/message/909> | Reply To Group
> <mailto:?subject=Re:%20Re%3A%20%5Brare-dev%5D%20%5Bfreertr%5D%20%5BRARE-users%5D%20freeRouter%20install%20error> | Reply To Sender
> <mailto:?subject=Private:%20Re:%20Re%3A%20%5Brare-dev%5D%20%5Bfreertr%5D%20%5BRARE-users%5D%20freeRouter%20install%20error> | Mute This Topic
> <https://groups.io/mt/96056106/6006518> | New Topic <https://groups.io/g/freertr/post>
> Your Subscription <https://groups.io/g/freertr/editsub/6006518> | Contact Group Owner <mailto:> | Unsubscribe <https://groups.io/g/freertr/unsub> []
>
> _._,_._,_