Rare project developers

[Frédéric LOUI <>]

You can try:
- to disable rmmod bf_kpkt 
- enable bf_kdrv 

-> then cfg again in order to see which port disappeared compared with the 
list with bf_kpkt loaded


> Le 3 juin 2022 à 10:13, Alexander Gall <> a écrit :
> 
> On Fri, 3 Jun 2022 09:50:49 +0200, Frédéric LOUI <> 
> said:
> 
>> Hi Alex,
> bf-sde> cfg
>> DVM:: Board configuration:
>> +----+------+-----+---+--------------------------------
>> |dev | port                                            
>> +----+------+-----+---+--------------------------------
>> |  0 |  68   
>> |  0 | 128   
>> |  0 | 192   
>> |  0 | 196   
>> +----+------+-----+---+-------------------------------- 
> 
>> You should be able to use the same command for TOIFNO 2 in order to find 
>> teh CPU port (and recirculation port)
> 
>> I should be curious able the output :)
> 
> Hm:
> 
> f-sde> cfg
> DVM:: Board configuration:
> +----+------+-----+---+--------------------------------
> |dev | port
> +----+------+-----+---+--------------------------------
> |  0 |   0
> |  0 |   1
> |  0 |   6
> |  0 | 128
> |  0 | 130
> |  0 | 132
> |  0 | 134
> |  0 | 168
> |  0 | 256
> |  0 | 258
> |  0 | 260
> |  0 | 262
> |  0 | 384
> |  0 | 386
> |  0 | 388
> |  0 | 390
> 
> Relative ports per pipe:
> 
> Pipe0: 0,1,6
> Pipe1: 0,2,4,6,40
> Pipe2: 0,2,4,6
> Pipe3: 0,2,4,6
> 
> I can't really identify them. My guess would be that 168 is the CPU
> PCIe port. Somehow I remember that there is a specific command to
> display just the CPU port, but I just can't find it any more.
> 
> -- 
> Alex