Rare project developers

[Frédéric LOUI <>]

As mentioned today a new page has been added:

https://docs.freertr.net/guides/installation/wedge100bf32/interface/

This small page will help user configure interface.

Don’t hesitate to provide feedback and even direct correction.
Frederic

PS: I just realised that after this interface page we need t add an addionnal 
quick guide for sub-interface illustrating the « dynamic » keyword in 
export-port.
       I omit this topic on purpose as I want to avoid [TL;DR] « too complex 
» feeling  :)

> Le 19 avr. 2022 à 15:00, Frédéric LOUI <> a écrit :
> 
> Hi !
> 
> In preparation to RARE/freeRtr first release. I started a new section @ 
> docs.freertr.net called: "Installation"
> 
> https://docs.freertr.net/guides/installation/wedge100bf32/onie-nos-install/
> 
> I’ll add further document page as soon as I’ll go through the discovery of 
> Nix release-manager integration into RARE NOS..
> 
> WRT Wedge100bf32, I see the need of the following page:
> - interfaces configuration guide
> - Manual Upgrade/Downgrade
> - Automatic scheduled upgrade (?)
> - Standalone installation (?)
> - Switch to RARE/freeRtr or P4 development environment (?)
> 
> As said before, the objective is to follow the KISS method. 
> So I hope this page will be simple and clear enough for the average user. :)
> 
> Can you please review and provide me your feedback ?
> 
> PS: The installation describes RARE/freeRtr installation on Wedge100bf32(x 
> or qs). 
>       However, it should be applicable to all p4 switch close to the 
> reference design. (Wedge100bf64x, APS6064X, Netberg NBA710, S9180, Inventec 
> D5264, ufiSpace S9180-32X etc. )
>        —> we will try to maintain a HCL here: 
> https://wiki.geant.org/display/RARE/Supported+devices. But obviously this 
> will be possible only if we can verify that RARE/freeRtr can be installed 
> on one sample.
>               Therefore, feel free to reach us should you think that you 
> can help us in making hardware available to the RARE/freeRtr project.
> 
> All the best,
> Frederic
> 
>> Le 19 avr. 2022 à 09:13, Frédéric LOUI <> a écrit :
>> 
>>>> just works! great job!
>> 
>> This is very good news !
>> 
>>> Thanks. So it seems that we may get release #1 soon :)
>> 
>> Great, meanwhile I’m preparing installation document on docs.freertr.net
>> 
>> All the best,
>> Frederic.
>