The mailing list for users of the eduroam Configuration Assistant Tool (CAT)

[Tomasz Wolniewicz <twoln AT umk.pl>]

Hi,

First of all an important thing - I have located a bug in the silent installed which causes it to hang (or rather loop getting all CPU on one processor core). The installer does everything fine before it hangs so people might not really notice that.

This is going to get fixed in the upcoming CAT update that is going to happen still in September.

The auto-join is the result of connectionmode=auto set in the profile. Clearly if you are using some sort of a wrapper around the installer you can just run

netsh wlan set profileparameter name=eduroam connectionmode=manual

after the installer exits. Or rather you will be able to do that after we update, since now the installed never exits.

Does this sound like a solution for your problem?

I would prefer to avoid adding another parameter to the config, it might be hard to maintain uniformity of behaviour across the whole range od CAT supported devices.

Tomasz

W dniu 03.09.2019 o 01:56, Lance Dahren pisze:

Hello again,

 

I have a query from the requestor that they need auto-join, is this supported via a command line or XML option?

 

 

Original email from requestor:

 

Is there an option to disable auto-join as a post install step of the wifi-profile?

 

Eg. netsh wlan set profileparameter name=eduroam connectionmode=auto

 

Or a way to access the files within the installer and change the xml file?

 

 

 

Regards,

 

Lance Dahren

Technical Analyst

Information and Technology Partners 
DAF | DES | DITID | DNRME | and Partners

GPO Box 2451, Brisbane Queensland 4001 Australia 
Telephone +617 3087 8926 | Ext 78926
Facsimile +617 3087 8324 
Email lance.dahren AT daf.qld.gov.au

Website www.daf.qld.gov.au

 

 

 

From: Tomasz Wolniewicz <twoln AT umk.pl>
Sent: Monday, 19 August 2019 7:13 PM
To: DAHREN Lance; cat-users AT lists.geant.org
Subject: Re: [[cat-users]] eduroam Deployment Via SCCM

 

Hi,

  The Windows installer has the standard /S flag. In this case the user will not be prompted for credentials, the prompt will come form Windows during the first connection. There will be a separate prompt for any SSID that might be configured. If you want to avoid the standard Windows CA install warning, then you need to install the root CA first, the installer will then notice that the cert is already there and will not install by itself.

Installation of GEANTLink also pops up a prompt. GEANTLink is only required for Windows 7 add not updated older Windows 10. You may also preinstall this by yourself if you think it will be needed. Also in this case there will be a check first and no reinstallation on the CAT installer side.

Cheers

Tomasz Wolniewicz

W dniu 19.08.2019 o 03:19, DAHREN Lance pisze:

Hello,

 

I have been requested to make this software available via SCCM, is there an easy way to install the software silently without prompts?

 

I am happy to perform a scripted install to install the certs and MSI, what else needs to be configured for the complete install of the software?

 

 

Regards,

 

Lance Dahren

Technical Analyst

Information and Technology Partners 
DAF | DES | DITID | DNRME | and Partners

GPO Box 2451, Brisbane Queensland 4001 Australia 
Telephone +617 3087 8926 | Ext 78926
Facsimile +617 3087 8324 
Email lance.dahren AT daf.qld.gov.au

Website www.daf.qld.gov.au

 

------------------------------
The information in this email together with any attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. There is no waiver of any confidentiality/privilege by your inadvertent receipt of this material.
Any form of review, disclosure, modification, distribution and/or publication of this email message is prohibited, unless as a necessary part of Departmental business.
If you have received this message in error, you are asked to inform the sender as quickly as possible and delete this message and any copies of this message from your computer and/or your computer system network.
------------------------------

To unsubscribe, send this message: mailto:sympa AT lists.geant.org?subject=unsubscribe%20cat-users
Or use the following link: https://lists.geant.org/sympa/sigrequest/cat-users

-- 

Tomasz Wolniewicz    

          twoln AT umk.pl        http://www.home.umk.pl/~twoln

Uczelniane Centrum Informatyczne   Information&Communication Technology Centre

Uniwersytet Mikolaja Kopernika     Nicolaus Copernicus University,

pl. Rapackiego 1, Torun               pl. Rapackiego 1, Torun, Poland

tel: +48-56-611-2750                            tel kom.: +48-693-032-576

-- 
Tomasz Wolniewicz    
          twoln AT umk.pl        http://www.home.umk.pl/~twoln

Uczelniane Centrum Informatyczne   Information&Communication Technology Centre
Uniwersytet Mikolaja Kopernika     Nicolaus Copernicus University,
pl. Rapackiego 1, Torun               pl. Rapackiego 1, Torun, Poland
tel: +48-56-611-2750                            tel kom.: +48-693-032-576

Attachment: smime.p7s
Description: Kryptograficzna sygnatura S/MIME