The mailing list for users of the eduroam Configuration Assistant Tool (CAT)

[Pavel Jenicek <pavel.jenicek AT vsb.cz>]

Hello Tomasz,

I did the test, bud with the same result - still not working .

After reconnecting the cable, no dialog appears and dot1x failed with 
timeout.

If I do the "refresh" in ethernet adapter settings I described recently, 
login dialog appears and after entering credentials, I can log in.

pj

--
Ing. Pavel Jeníček

Network, Storage & SAN Administrator
Computer Center
VŠB - Technical University Of Ostrava
17. listopadu 15/2172
708 33 Ostrava - Poruba
Czech Republic
tel.:   +420 597 324 704
e-mail: 
pavel.jenicek AT vsb.cz
office: NA305

Dne 29. 9. 2016 v 14:16 Tomasz Wolniewicz napsal(a):
> Hi Pavel,
>    Could you please run the following test:
> disconnect the Ethernet cable, run the installer and provide
> credentials, connect the cable.
>
> On my tests the Windows credentials popup is too quick and happens
> before the credentials get actually installed.
> Perhaps this is something that can be taken care of in future, I need to
> check, but the test I have described works for me.
> Tomasz
>
>
> W dniu 2016-09-29 o 12:20, Pavel Jenicek pisze:
> > Hello Tomasz,
> > today I tested CAT 1.1.3 on wired and unfortunatelly, is not working
> > for me.
> >
> > Environment:
> > Windows 10 Enterprise, all updates installed
> > C3750, IOS15.0(2)SE8 as authenticator
> > radiator radius sever
> >
> > After CAT install, on cisco switch console, I received dot1x timeout.
> > It seems that my station is not sending any credentials ...
> >
> > Sep 29 11:49:02.735 MET-DST: %AUTHMGR-7-RESULT: Authentication result
> > 'timeout' from 'dot1x' for client (d4be.d971.ff06) on Interface
> > Gi1/0/19 AuditSessionID AC10097900000173DDC234D2
> >
> > If I go to network adapter setting -> 802.1x setting and change "User
> > authentication" to "User or computer authentication", then click OK
> > and then back to "User authentication" and OK again (so same setting
> > as I started with, but "refreshed") new Sign-In dot1x dialog appears
> > and if I enter the credentials it works ...
> >
> > Sep 29 11:58:16.676 MET-DST: %AUTHMGR-7-RESULT: Authentication result
> > 'success' from 'dot1x' for client (d4be.d971.ff06) on Interface
> > Gi1/0/19 AuditSessionID AC1009790000017DDDCABEC6
> > Sep 29 11:58:17.489 MET-DST: %AUTHMGR-5-SUCCESS: Authorization
> > succeeded for client (d4be.d971.ff06) on Interface Gi1/0/19
> > AuditSessionID AC1009790000017DDDCABEC6
> >
> > Any clue ?
> >
> > Thanks,
> > Pavel

Attachment: smime.p7s
Description: Elektronicky podpis S/MIME