RARE user and assistance email list

[mc36 <>]

2. is interesting because i saw the autoupgrade configured... can you verify 
please if you have internet access?
anyway, then "reload process p4emu" is the old-ish way to trigger the 
dataplane reprogramming...
thanks,
cs

On 2/25/22 18:29, Xavier Jeannin wrote:
> Thank you Csaba
>
> 1/ Tried shut/no shut sdn5 with no success (see below)
> 2/ I do not find clear p4lang p4 - it does not appear in the CLI. Where 
> should I find it ?
>
> Thank you
> Xavier
>
>
> DAV0102#show interfaces summary
> interface         state   tx                             rx                   
>               drop
> loopback0         up         0                               0                
>                    0
> loopback1         up         1360606                   0                      
>              0
> loopback4444   up         66                             0                    
>                0
> loopback6666   up         2497648                   0                         
>           0
> ethernet0         up         7592222248             6837780893                
>  0
> sdn1                   up         8758817+9813357   297342+331554           
> 213+0
> sdn2                   up         8759054+9813541   297651+331923           
> 48+0
> sdn3                   up         8759924+9814875   298878+333474           
> 0+0
> sdn4                   admin   805528+5318969     23335384+54435072 30639616+0
> sdn5                   down     0                               0             
>                       77415
> sdn6                   up         8760308+9815177   298755+333303           
> 0+0
> sdn7                   up         8759084+9813587   297651+331923           
> 48+0
>
> DAV0102#conf t
> DAV0102(cfg)#interface sdn5
> DAV0102(cfg-if)#shutdown
> DAV0102(cfg-if)#no shutdown
> DAV0102(cfg-if)#do show interfaces summary
> interface         state   tx                             rx                   
>               drop
> loopback0         up         0                               0                
>                    0
> loopback1         up         1360606                   0                      
>              0
> loopback4444   up         66                             0                    
>                0
> loopback6666   up         2497878                   0                         
>           0
> ethernet0         up         7592224033             6837783967                
>  0
> sdn1                   up         8759168+9813744   297342+331554           
> 213+0
> sdn2                   up         8759405+9813928   297651+331923           
> 48+0
> sdn3                   up         8760275+9815262   298878+333474           
> 0+0
> sdn4                   admin   805528+5318969     23336398+54436242 30640981+0
> sdn5                   down     0                               0             
>                       77766
> sdn6                   up         8760659+9815564   298755+333303           
> 0+0
> sdn7                   up         8759435+9813974   297651+331923           
> 48+0
>
> DAV0102(cfg-if)#exit
> DAV0102(cfg)#exit
> DAV0102#clear p4lang p4
> invalid command, try clear ?
>
> DAV0102#clear ?
>     access-list       - access list statistics
>     auto-bandwidth - set auto bandwidth values
>     bmp                       - clear one bmp server
>     bridge                 - learnt mac address on a bridge
>     counters             - counters on one or more interfaces
>     dial-peer           - clear voip call
>     errors                 - error reporter
>     follow-tracker - set interfaces based on trackers
>     hwcounters         - hardware counters on one or more interfaces
>     interface           - disconnect interface
>     ipv4                     - ipv4 parameters
>     ipv6                     - ipv6 parameters
>     line                     - disconnect line
>     logging               - logged messages
>     name-cache         - dns local cache
>     object-group     - object group statistics
>     prefix-list       - prefix list statistics
>     process               - restart external process
>     reflected-acl   - clear access list entries
>     route-map           - route map statistics
>     route-policy     - route policy statistics
>     scheduler           - run one scheduler round
>     script                 - run one script round
>     sensor                 - trigger telemetry export
>     socket                 - clear one socket
>     swcounters         - software counters on one or more interfaces
>     telemetry           - trigger telemetry report
>     tunnel-domain   - resolve destination domain names
>     vdc                       - restart vdc process
>     vpdn                     - reconnect vpdn peer
>     watchdog             - watchdog
>
>
> Le 25/02/2022    17:09, mc36 a   crit  :
> > hi,
> > i see that you have "export-port sdn6 5" and "no shutdown"...
> > you can verify if these are in effect by issuing "show inter summ"...
> > the thing to look at is sw+hw notation in the counter columns...
> > if that is the case, you can flap the port   by shut/noshut on sdn6,
> > if that still not help, you can try a whole dataplane reprogramming
> > by issuing "clear p4lang p4".. if all of these does not help,
> > imho we should assume that link is really down... :)
> > regards,
> > cs
> >
> >
> > On 2/25/22 16:39, Xavier Jeannin wrote:
> > > Dear All,
> > >
> > > Last time I got an interface down after different configuration step.
> > > I was not able to bring it up, Fr   d   ric kindly restore it but I still not 
> > > does not understand what I should have done to bring up the interface.
> > > So I just made the same configuration change and tried to bring it up
> > > This time I tried to suppress vrf inet and restore it but still my interface 
> > > sdn5 is down.
> > >
> > > Can you tell what would be the debugging process to solve this issue?
> > >
> > > Thank you
> > > Regards
> > > Xavier
> > >
> > >
> > > DAV0102#show interfaces sdn5
> > > sdn5 is down (since 04:10:09, 2 changes)
> > >      description: 10G-FP2[eno7 - 05:00.1 - 18:5a:58:d8:d4:65]
> > >      type is sdn, hwaddr=0014.0b0d.536c, mtu=1500, bw=1000mbps, vrf=inet
> > >      ip4 address=11.11.11.4/24, netmask=255.255.255.0, ifcid=670359401
> > >      received 0 packets (0 bytes) dropped 506 packets (53196 bytes)
> > >      transmitted 0 packets (0 bytes) promisc=false macsec=false
>>>
> > > DAV0102#show running-config hide
> > > hostname DAV0102
> > > buggy
> > > !
> > > logging buffered debug 8192
> > > logging file debug zzz.log
> > > logging rotate 65536000 zzz.old
> > > !
> > > crypto rsakey rsa import $w10$<removed>$
> > > !
> > > crypto dsakey dsa import $w10$<removed>$
> > > !
> > > crypto ecdsakey ecdsa import $w10$<removed>$
> > > !
> > > aaa userlist users
> > >      username *
> > >      username * anypass
> > >      username rare
> > >      username rare password $w10$<removed>$
> > >      exit
> > > !
> > > scheduler errors
> > >      time 600000
> > >      delay 30000
> > >      command clear errors 
> > >      start
> > >      exit
> > > !
> > > scheduler upgrade
> > >      time 600000
> > >      delay 60000
> > >      random-time 60000
> > >      random-delay 300000
> > >      command flash upgrade
> > >      start
> > >      exit
> > > !
> > > object-group network host4
> > >      sequence 10 10.255.255.0 255.255.255.0
> > >      exit
> > > !
> > > object-group network host6
> > >      sequence 10 2001:db8:ffff:ffff:: ffff:ffff:ffff:ffff::
> > >      exit
> > > !
> > > object-group network lloc4
> > >      sequence 10 169.254.0.0 255.255.0.0
> > >      exit
> > > !
> > > object-group network lloc6
> > >      sequence 10 fe80:: ffff::
> > >      exit
> > > !
> > > object-group network mcast4
> > >      sequence 10 224.0.0.0 255.255.0.0
> > >      exit
> > > !
> > > object-group network mcast6
> > >      sequence 10 ff00:: ff00::
> > >      exit
> > > !
> > > access-list nat4
> > >      sequence 10 deny all obj lloc4 all any all
> > >      sequence 20 deny all any all obj mcast4 all
> > >      sequence 30 deny all obj host4 all obj host4 all
> > >      sequence 40 permit all obj host4 all any all
> > >      exit
> > > !
> > > access-list nat6
> > >      sequence 10 deny all obj lloc6 all any all
> > >      sequence 20 deny all any all obj mcast6 all
> > >      sequence 30 deny all obj host6 all obj host6 all
> > >      sequence 40 permit all obj host6 all any all
> > >      exit
> > > !
> > > prefix-list all4
> > >      sequence 10 permit 0.0.0.0/0 ge 0 le 0
> > >      exit
> > > !
> > > prefix-list all6
> > >      sequence 10 permit ::/0 ge 0 le 0
> > >      exit
> > > !
> > > vrf definition inet
> > >      exit
> > > !
> > > vrf definition p4
> > >      exit
> > > !
> > > router ospf4 1
> > >      vrf inet
> > >      router-id 10.1.4.4
> > >      traffeng-id 0.0.0.0
> > >      area 0 enable
> > >      exit
> > > !
> > > router ospf6 1
> > >      vrf inet
> > >      router-id 10.1.4.4
> > >      traffeng-id ::
> > >      area 0 enable
> > >      exit
> > > !
> > > interface loopback0
> > >      no description
> > >      vrf forwarding inet
> > >      ipv4 address 10.1.4.4 255.255.255.255
> > >      router ospf4 1 enable
> > >      router ospf4 1 area 0
> > >      router ospf4 1 passive
> > >      no shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > interface loopback1
> > >      no description
> > >      vrf forwarding inet
> > >      ipv4 address 2.2.2.4 255.255.255.255
> > >      ipv6 address 4321::4 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
> > >      router ospf4 1 enable
> > >      router ospf4 1 area 0
> > >      router ospf4 1 passive
> > >      router ospf6 1 enable
> > >      router ospf6 1 area 0
> > >      router ospf6 1 passive
> > >      no shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > interface loopback4444
> > >      no description
> > >      vrf forwarding inet
> > >      ipv4 address 4.4.4.4 255.255.255.255
> > >      router ospf4 1 enable
> > >      router ospf4 1 area 0
> > >      router ospf4 1 passive
> > >      no shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > interface loopback6666
> > >      no description
> > >      vrf forwarding inet
> > >      ipv6 address fd00::4:4:4:4 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
> > >      router ospf6 1 enable
> > >      router ospf6 1 area 0
> > >      router ospf6 1 passive
> > >      no shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > interface ethernet0
> > >      description p4 cpu port
> > >      no shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > interface sdn1
> > >      description FP3[eno3 - 02:00.0 - 18:5a:58:d8:d4:60]
> > >      mtu 1500
> > >      macaddr 0019.4e1a.2668
> > >      lldp enable
> > >      vrf forwarding inet
> > >      ipv4 address 10.1.34.4 255.255.255.0
> > >      no shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > interface sdn2
> > >      description FP4[eno4 - 02:00.1 - 18:5a:58:d8:d4:61]
> > >      mtu 1500
> > >      macaddr 005a.0c2f.7412
> > >      lldp enable
> > >      vrf forwarding inet
> > >      ipv4 address 10.2.34.4 255.255.255.0
> > >      no shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > interface sdn3
> > >      description FP1[eno1 - 02:00.2 - 18:5a:58:d8:d4:62]
> > >      mtu 1500
> > >      macaddr 185a.58d8.d462
> > >      lldp enable
> > >      vrf forwarding inet
> > >      ipv4 address 10.3.34.4 255.255.255.0
> > >      no shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > interface sdn4
> > >      description 10G-FP1[eno8 - 05:00.0 - 18:5a:58:d8:d4:64]
> > >      mtu 1500
> > >      macaddr 000e.1d31.067c
> > >      lldp enable
> > >      vrf forwarding inet
> > >      ipv4 address 10.1.24.4 255.255.255.0
> > >      router ospf4 1 enable
> > >      router ospf4 1 area 0
> > >      shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > interface sdn5
> > >      description 10G-FP2[eno7 - 05:00.1 - 18:5a:58:d8:d4:65]
> > >      mtu 1500
> > >      macaddr 0014.0b0d.536c
> > >      lldp enable
> > >      vrf forwarding inet
> > >      ipv4 address 11.11.11.4 255.255.255.0
> > >      no shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > interface sdn6
> > >      description FP6[eno6 - 07:00.0 - 18:5a:58:d8:d4:66]
> > >      mtu 1500
> > >      macaddr 0032.380d.1e76
> > >      lldp enable
> > >      vrf forwarding inet
> > >      ipv4 address 10.6.34.4 255.255.255.0
> > >      no shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > interface sdn7
> > >      description FP5[eno5 - 07:00.1]
> > >      mtu 1500
> > >      macaddr 003d.0919.4168
> > >      lldp enable
> > >      vrf forwarding inet
> > >      ipv4 address 10.7.34.4 255.255.255.0
> > >      no shutdown
> > >      no log-link-change
> > >      exit
> > > !
> > > proxy-profile inet
> > >      vrf inet
> > >      exit
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > ipv4 nat inet sequence 10 srclist nat4 interface sdn3
> > > !
> > > ipv6 nat inet sequence 10 srclist nat6 interface sdn3
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > alias test bash command attach shell1 socat - exec:bash,ctty,pty,stderr
> > > alias test bash description get linux shell
> > > !
> > > server telnet p4
> > >      security protocol telnet
> > >      no exec authorization
> > >      no login authentication
> > >      vrf p4
> > >      exit
> > > !
> > > server telnet tel
> > >      security authentication users
> > >      security rsakey rsa
> > >      security dsakey dsa
> > >      security ecdsakey ecdsa
> > >      access-log
> > >      access-rate 5 5000
> > >      access-total 5
> > >      access-peer 5
> > >      second-port 22
> > >      exec logging
> > >      no exec authorization
> > >      login authentication users
> > >      login logging
> > >      login last global
> > >      vrf inet
> > >      exit
> > > !
> > > server p4lang p4
> > >      export-vrf inet 1
> > >      export-port sdn1 0 1 0 0 0
> > >      export-port sdn2 1 1 0 0 0
> > >      export-port sdn3 2 1 0 0 0
> > >      export-port sdn4 3 10 0 0 0
> > >      export-port sdn5 4 10 0 0 0
> > >      export-port sdn6 5 1 0 0 0
> > >      export-port sdn7 6 1 0 0 0
> > >      interconnect ethernet0
> > >      vrf p4
> > >      exit
> > > !
> > > server dns ns
> > >      recursion enable
> > >      vrf inet
> > >      exit
> > > !
> > > client proxy inet
> > > client name-server 193.49.159.2
> > > client upgrade-server http://upgrade.nop.hu/
> > > client upgrade-backup
> > > client config-backup
> > > client time-server europe.pool.ntp.org
> > > client time-zone CET
> > > !
> > > end