RARE user and assistance email list

[Xavier Jeannin <>]

1/ other missing point in the conf, I suppose I also have to add 
"export-vrf "
2/ thank you Csaba, is it easy to have the bridging available in the 
p4lab ? if not I will then implement it elsewhere ...

Regards
Xavier



Le 21/02/2022 à 16:37, mc36 a écrit :

> and i see an other issue: the p4lab profile does not have bridging 
> enabled in tofino.bin....
>
>
> On 2/21/22 15:51, Fr  d  ric LOUI wrote:
> > Xavier,
> >
> > You exported sdn1.2200 with id: 133 which is TOFINO port 31/1 on 
> > WEDGE    (At least on WEDGE in my LAB)
> >
> > Sub-interface or logical interface should not use port_id used by 
> > TOFINO.
> >
> > In my example I put:
> > export-port sdn1.2200 211 10 0 0 0
> >
> > You are safe to use ID _above_ 200.
> >
> > So for sdn3.2200 you can declare it  as:
> > export-port sdn3.2200 212 10 0 0 0
> >
> > But remove these lines:
> >   export-port sdn2.2200 141 10 0 0 0
> >
> > 141 is TOFINO port 32/1 ...
> >
> > sdn3.2200 declaration is OK
> > export-port sdn3.2200 202 10 0 0 0
> >
> > > Le 21 f  vr. 2022    15:08, Xavier Jeannin 
> > > <> a   crit :
> > >
> > > Hello
> > >
> > > thank you
> > >
> > > I added the bridge (export-bridge) and the 2 interfaces (export-port)
> > > I also put nothing in sdn1 (previously there was IP addresses)
> > > but still the interface sdn1 and sdn1.2200 are down
> > >
> > > AMS0001#show running-config interface sdn1
> > > interface sdn1
> > >   no description
> > >   mtu 1500
> > >   macaddr 005c.3543.4915
> > >   no shutdown
> > >   no log-link-change
> > >   exit
> > > !
> > >
> > > AMS0001#show running-config interface sdn1.2200
> > > interface sdn1.2200
> > >   description ""LAYER 2 VLAN 2200 to FRA2"
> > >   macaddr 2200.2200.0001
> > >   bridge-group 1
> > >   no shutdown
> > >   no log-link-change
> > >   exit
> > > !
> > >
> > > AMS0001#show running-config server p4lang
> > > server p4lang p4
> > >   export-vrf CORE 1
> > >   export-vrf v2 2
> > >   export-vrf INB_MGNT 3
> > >   export-bridge 1
> > >   export-port sdn1 132 10 0 0 0
> > >   export-port sdn1.2200 133 10 0 0 0
> > >   export-port sdn2 140 10 0 0 0
> > >   export-port sdn2.2200 141 10 0 0 0
> > >   export-port sdn3 148 10 0 0 0
> > >   export-port sdn3.2200 202 10 0 0 0
> > >   export-port sdn3.701 203 10 0 0 0
> > >   export-port sdn3.3068 204 10 0 0 0
> > >   export-port sdn3.1916 205 10 0 0 0
> > >   export-port sdn3.702 206 10 0 0 0
> > >   export-port sdn3.101 207 10 0 0 0
> > >   export-port sdn3.1214 208 0 0 0 0
> > >   export-port tunnel1122 210 10 0 0 0
> > >   export-port sdn3.102 211 10 0 0 0
> > >   interconnect ethernet0
> > >   vrf p4
> > >   exit
> > >
> > > Regards
> > > Xavier
> > >
> > > Le 21/02/2022    14:33, Fr  d  ric LOUI a   crit :
> > > > You can look at freertr test case here:
> > > > http://sources.nop.hu/cfg/p4lang-acl13.tst
> > > >
> > > > You   ll be able to see how bridge and related interface are declared.
> > > >
> > > > > Le 21 f  vr. 2022    14:27, Fr  d ric LOUI 
> > > > > <> a   crit :
> > > > >
> > > > > You also have to add the bridge in "server p4lang p4   If you want 
> > > > > it to be taken into account by the dataplane.
> > > > >
> > > > > AMS0001(cfg)#server p4lang p4
> > > > > AMS0001(cfg-server)#export-bridge ?
> > > > >   <num> - bridge number
> > > > >
> > > > >
> > > > > And also the interface you bound to the bridge. e.g sdn1.2200
> > > > >
> > > > > AMS0001(cfg-server)#export-port sdn1.2200 211 10 0 0 0
> > > > >
> > > > > > Le 21 f  vr. 2022    11:25, Xavier Jeannin 
> > > > > > <> a   crit :
> > > > > >
> > > > > > We declare a bridge and put a subinterface sdn1.2200 in the bridge
> > >
> > > --
> > > Xavier JEANNIN
> > > Network Dpt. - Innovation manager
> > > GN4-3 Network technology evolution (WP6 T1) task leader
> > > T  l. : +33 1 5394 2042
> > > Mob. : +33 6 3017 0963
> > > www.renater.fr
--
Xavier JEANNIN
Network Dpt. - Innovation manager
GN4-3 Network technology evolution (WP6 T1) task leader
Tél. : +33 1 5394 2042
Mob. : +33 6 3017 0963
www.renater.fr