RARE user and assistance email list

[Frédéric LOUI <>]

Hi Marcos,

There were typos in my previous mail:

Is it voluntary to:

* To put  sdn19 in: bridge 1
* To put  sdn20 in: bridge 1

* And sdn19.19 and sdn20.19 in bridge 2 ?

Please find the following stanza:
More info here: http://sources.nop.hu/cfg/conn-bridge02.tst 
Here: http://sources.nop.hu/cfg/p4lang-acl13.tst
And there: http://sources.nop.hu/cfg/p4lang-acl14.tst

conf t
int sdn19
 no  bridge-group 1
 exit
int sdn19.19
 no  bridge-group 2
 bridge-group 2
 exit
int sdn20
 no  bridge-group 1
 exit
int sdn20.19
 no bridge-group 2
 bridge-group 2
 exit
 end

Sorry for the typo. But I presumed that you get the idea :-)

À bientôt,
--  Frederic




> Le 29 août 2021 à 15:01, Frédéric LOUI <> a écrit :
> 
> Hi Marcos,
> 
> I’d check real quick your config I have a question.
> 
> This is the output on RIO0001:
> 
> "show bridge <x>"
> 
> RIO0001#sh bridge 1                                                         
>         
>                   packet           byte
> iface  fwd   phys  tx    rx   drop  tx      rx     drop  grp
> bvi    true  true  0     0    0     0       0      0
> sdn15  true  true  5560  0    1     575540  0      116
> sdn16  true  true  5560  0    1     575540  0      116
> sdn19  true  true  6216  684  1     595134  33044  116
> sdn20  true  true  6216  684  1     595134  33044  116
> 
>                                 packet            byte
> addr            iface  time      tx    rx    drop  tx     rx      drop
> 004c.7c58.300a  bvi    00:00:56  1298  6830  0     62304  612712  0
> 0c42.a15d.2f9c  sdn20  00:00:56  669   684   0     20430  33044   0
> 0c42.a15d.3084  sdn19  00:00:56  671   684   0     20526  33044   0
> 
> 
> RIO0001#sh bridge 2                                                         
>         
>                      packet            byte
> iface     fwd   phys  tx    rx    drop  tx     rx     drop  grp
> bvi       true  true  0     0     0     0      0      0
> sdn19.19  true  true  1246  268   0     44282  11792  0
> sdn20.19  true  true  1638  1109  0     52892  48796  0
> 
>                                    packet           byte
> addr            iface     time      tx   rx    drop  tx     rx     drop
> 0073.7101.3b3a  bvi       00:03:25  616  1370  0     27104  41100  0
> 0c42.a15d.2f9c  sdn20.19  00:03:25  884  1109  0     30258  48796  0
> 
> "end of show bridge <x>"
> 
> ------------------------------
> 
> interface sdn19
> no description
> mtu 1500
> macaddr 006a.4247.1173
> lldp enable
> bridge-group 1
> no shutdown
> no log-link-change
> exit
> interface sdn19.19
> no description
> bridge-group 2
> no shutdown
> no log-link-change
> exit
> 
> ------------------------------
> 
> RIO0001#sh run sdn20                                                        
>         
> interface sdn20
> no description
> mtu 1500
> macaddr 001a.5b5c.306d
> lldp enable
> bridge-group 1
> no shutdown
> no log-link-change
> exit
> interface sdn20.19
> no description
> bridge-group 2
> no shutdown
> no log-link-change
> exit
> 
> Is it voluntary to:
> 
> * To put  sdn19 in: bridge 1
> * To put  sdn20 in: bridge 2
> 
> * And sdn19.19 and sdn20.19 in bridge 2 ?
> 
> 
> As you can see on freeRtr test case: 
> http://sources.nop.hu/cfg/conn-bridge02.tst
> bridge-group @ sdn MAIN interface is not required. (I’m talking under MC36 
> control here :) )
> 
> If this is not mandatory as per your opinion, I would try:
> 
> 
> conf t
> int sdn19
> no  bridge-group 1
> exit
> int sdn19.19
> no  bridge-group 2
> bridge-group 2
> exit
> int sdn20
> no  bridge-group 2
> exit
> int sdn20.19
> no bridge-group 2
> bridge-group 2
> exit
> end
> 
> If you notice we configured and reconfigured some feature as this this try 
> to trigger dataplane update.
> Check if that works (shut/ no shut sdn<x> —> this will also trigger 
> dataplane update)
> 
> And if for any reasons dataplane table are messed up, retry to sync: clear 
> process bffwd
> 
> Please let us know if this has solved the situation.
> 
> À bientôt,
> --  Frederic
> 
> 
> 
> 
>> Le 28 août 2021 à 14:54, Marcos Felipe Schwarz <> a 
>> écrit :
>> 
>> Hi everyone, I’m trying to create a tagged VLAN between two ports. Can you 
>> spot what's missing?
>> 
>> 7:56
>> 
>> RIO0001(cfg)#show config-differences
>> vrf definition v2
>> server p4lang p4
>> export-vrf v2 2
>> export-bridge 2
>> export-port sdn19.19 202 0 0 0 0
>> export-port sdn20.19 203 0 0 0 0
>> export-port bvi2 204 0 0 0 0
>> exit
>> bridge 2
>> mac-learn
>> exit
>> interface bvi2
>> no description
>> vrf forwarding v2
>> ipv4 address 10.0.19.254 255.255.255.0
>> no shutdown
>> no log-link-change
>> exit
>> interface sdn19.19
>> no description
>> bridge-group 2
>> no shutdown
>> no log-link-change
>> exit
>> interface sdn20.19
>> no description
>> bridge-group 2
>> no shutdown
>> no log-link-change
>> exit
>> 
>> 7:57
>> 
>> I have an untaged VLAN working on the same ports, so I'm sure the problem 
>> is on my config
>> 
>> 
>> 
>> Regards,
>> 
>> 
>> 
>> Marcos Schwarz
>> 
>> 
>> 
>> Gerente de P&D | R&D Manager
>> 
>> Gerência de Execução de P&D em Ciberinfraestrutura | Management of R&D 
>> Execution in Cyberinfrastructure
>> 
>> Diretoria de Pesquisa e Desenvolvimento | Board of Research and Development
>> 
>> RNP - Rede Nacional de Ensino e Pesquisa | Brazilian National Research and 
>> Educational Network
>> 
>> Promovendo o uso inovador de redes avançadas | Promoting the innovative 
>> use of advanced networks
>> 
>> http://www.rnp.br | +55 (19) 3787- 3386 | Skype ID: marcos.f.sch
>> 
>> Campinas - SP - Brasil | E-mail: 
>> 
>> 
>> 
>