Skip to Content.
Sympa Menu

rare-users - Re: [RARE-users] RES: Wedge interconnection using Juniper DAC cable.

Subject: RARE user and assistance email list

List archive

Re: [RARE-users] RES: Wedge interconnection using Juniper DAC cable.


Chronological Thread 
  • From: <>
  • To: <>
  • Cc: <>, Marcos Felipe Schwarz <>, Pedro Diniz <>, "Fernando Nazareno Nascimento Farias" <>, Michael Prieto Hernandez <>
  • Subject: Re: [RARE-users] RES: Wedge interconnection using Juniper DAC cable.
  • Date: Mon, 23 Aug 2021 10:44:34 +0200
  • Authentication-results: mx2.switch.ch; x-trusted-ip=pass

On Sat, 21 Aug 2021 12:39:24 +0200, mc36 <> said:

> as far as i know, for 100g, the setting the fec is mandatory...

Not in general, e.g. it's not mandatory for LR4 or ER4. But it is
mandatory for SR4, which is what AOC is. However, it is usually
configurable anyway. I have used the same 3m AOC successfully with and
without FEC with the Wedge, as long as both sides are configured the
same. By default, Juniper (and Cisco as well) enables FEC with SR4.

To answer Marcos' question in more detail: either disable FEC on the
Juniper or enable it on the Wedge with (unfortunately this is a bit
cryptic, the first "1" after the speed setting enables RS-FEC)

export-port sdn7 180 100 1 1 0

--
Alex

> regards,
> cs


> On 8/20/21 3:39 PM, Marcos Felipe Schwarz wrote:
>> Just correcting that the cable is AOC not DAC.
>>
>>
>> Regards,
>>
>> Marcos Schwarz
>>
>> *De:*Marcos Felipe Schwarz
>> *Enviada em:* sexta-feira, 20 de agosto de 2021 08:52
>> *Para:*
>> *Cc:* Pedro Diniz <>; Fernando Nazareno
>> Nascimento Farias <>; Michael Prieto Hernandez
>> <>
>> *Assunto:* Wedge interconnection using Juniper DAC cable.
>>
>> Hi everyone,
>>
>> We are using RARE OS at RNP on a EdgeCore Wedge, and we are trying to
>> setup an interconnect from it to a Juniper Router using a 100G DAC cable
>> from Juniper.
>>
>> I setup the port using the configuration below, but the cort continues
>> DOWN. IÂ’d like some help with the configuration or with some troubleshoot
>> options to try to find the problem.
>>
>> interface sdn7
>>
>> lldp enable
>>
>> vrf forwarding inet
>>
>> ipv4 address 200.143.232.255 255.255.255.254
>>
>> no shutdown
>>
>> log-link-change
>>
>> exit
>>
>> server p4lang p4
>>
>> export-port sdn7 180 100 0 1 0
>>
>> exit
>>
>> -----+----+---+----+-------+----+--+--+---+---+---+--------+----------------+----------------+-
>>
>> PORT |MAC |D_P|P/PT|SPEED  |FEC |AN|KR|RDY|ADM|OPR|LPBK    |FRAMES RX 
>>       |FRAMES TX       |E
>>
>> -----+----+---+----+-------+----+--+--+---+---+---+--------+----------------+----------------+-
>>
>> 7/0  |17/0|180|3/52|100G   |NONE|Ds|Au|YES|ENB|DWN|  NONE  |     
>>           0|               0|
>>
>> Regards,
>>
>> Marcos Schwarz
>>
>> *Gerente de P&D | /R&D Manager/*
>>
>> Gerência de Execução de P&D em Ciberinfraestrutura | /Management of R&D
>> Execution in Cyberinfrastructure/
>>
>> Diretoria de Pesquisa e Desenvolvimento | /Board of Research and
>> Development/
>>
>> RNP - Rede Nacional de Ensino e Pesquisa | /Brazilian National Research
>> and Educational Network/
>>
>> Promovendo o uso inovador de redes avançadas | /Promoting the innovative
>> use of advanced networks/
>>
>> http://www.rnp.br <http://www.rnp.br/> | +55 (19) 3787-3386 | Skype ID:
>> marcos.f.sch**
>>
>> Campinas - SP - Brasil | E-mail:
>> <>
>>



Archive powered by MHonArc 2.6.19.

Top of Page