Rare project developers

[mc36 <>]

look at this:

https://github.com/stratum/stratum/blob/753270b6061c5efe15ee60178169b8abe032f65e/stratum/hal/bin/barefoot/deb/start-stratum.sh#L54-L63
especially the #L61, that is, everything except the wedges, they bring them 
up without a bsp!!!
qsfps work fine without bsp... serdes too... okk, sensors are really missing 
but heyy...

also: 
https://github.com/stratum/stratum/blob/main/stratum/hal/bin/barefoot/README.build.md
  // ctrl+f: recommended mode

gawen, how you see it?

thanks,
cs



On 7/4/22 09:20, Alexander Gall wrote:
> On Fri, 1 Jul 2022 19:10:27 +0200, mc36 <> said:
>
> > what about this one? :)
> > https://github.com/stratum/stratum/blob/main/stratum/hal/config/x86-64-inventec-d10064-r0/port_map.json
>
> Same thing. This will set up the serdes to match the board, but
> without the BSP none of the i2c-related stuff works. Actually, the
> Inventec is even more complicated because some of the
> platform-dependent stuff is currently still supplied by the ONL layer
> (i2c enumeration, HW sensors, QSFP eeprom access etc.), not the
> BSP. And the ONL stuff doesn't work on Debian 11 out of the box :(