Skip to Content.
Sympa Menu

rare-dev - Re: [rare-dev] Access

Subject: Rare project developers

List archive

Re: [rare-dev] Access


Chronological Thread 
    < Chronological >      < Thread >
  • From: Frédéric LOUI <>
  • To: Alexander Gall <>
  • Cc: Gawen Davey <>, "" <>, "" <>, Alexander Jeffries <>
  • Subject: Re: [rare-dev] Access
  • Date: Wed, 22 Jun 2022 10:14:11 +0200
  • Dkim-filter: OpenDKIM Filter v2.10.3 zmtaauth02.partage.renater.fr 03EDDA01BB
I sent a BSP tarball to Alex.
Ideally it would be great if we could all get it from APS portal.

Annyway

Thanks !

> Le 22 juin 2022 à 08:15, Alexander Gall <> a écrit :
>
> Hi
>
> Any chance I can get my hands on the BSP as well? I could start
> integrating it into the build process for the RARE release.
>
> --
> Alex
>
> On Tue, 21 Jun 2022 21:04:23 +0000, Gawen Davey
> <> said:
>
>> Ok, I've replicated. Will get back to you.
>> ---------------------------------------------------------------------------------------------------------------------------------------------
>> From: mc36 <>
>> Sent: 21 June 2022 21:43
>> To: Gawen Davey <>
>> Cc: <>; Alexander Gall
>> <>; Alexander Jeffries
>> <>; Frédéric LOUI
>> <>
>> Subject: Re: Access
>
>> hi
>> i've added ipmitool, it changed a bit, but for now, i have no bfswd
>> processes at all...
>> ps: here is the contents of the s.sh, it just reinstalls the igb with
>> i2c... by default,
>> they're not provided... it was the same on the stock debian install on the
>> old sde too...
>> (before trying this, i just started without them but then bfswd complained
>> about i2c...)
>> thanks,
>> cs
>
>> mc36@stordis:~$ cat s.sh
>> #/bin/bash
>> echo 256 | sudo tee /proc/sys/vm/nr_hugepages
>> sudo modprobe -r igb
>> sudo modprobe -r i2c_i801
>> sudo modprobe -r i2c_dev
>> sudo modprobe i2c_dev
>> sudo modprobe igb
>> sudo modprobe i2c_i801
>> sudo i2cdetect -l
>> sudo -E $SDE/pkgsrc/bf-drivers/kdrv/bf_kpkt_mod_load $SDE/install
>> sudo -E $SDE/run_switchd.sh -p bf_router
>> mc36@stordis:~$ ./s.sh
>> [sudo] password for mc36:
>> 256
>> i2c-1 i2c igb BB I2C adapter
>> i2c-2 smbus SMBus I801 adapter at f000 SMBus
>> adapter
>> i2c-0 i2c igb BB I2C adapter
>> Using SDE /home/mc36/bf-sde-9.9.0/
>> Using SDE_INSTALL /home/mc36/bf-sde-9.9.0//install/
>> Setting up DMA Memory Pool
>> Using TARGET_CONFIG_FILE
>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>> Using PATH
>> /home/mc36/bf-sde-9.9.0//install//bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
>> Using LD_LIBRARY_PATH /usr/local/lib:/home/mc36/bf-sde-9.9.0//install//lib:
>> checking for bf_sysfs_fname /sys/class/bf/bf0/device/dev_add
>> kernel mode packet driver present, forcing kernel_pkt option!
>> bf_switchd: Install dir: /home/mc36/bf-sde-9.9.0//install/
>> bf_switchd: system services initialized
>> bf_switchd: loading conf_file
>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf...
>> bf_switchd: processing device configuration...
>> Configuration for dev_id 0
>> Family : tofino
>> pci_sysfs_str : /sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0
>> pci_int_mode : 0
>> sds_fw_path : share/tofino_sds_fw/avago/firmware
>> bf_switchd: processing P4 configuration...
>> P4 profile for dev_id 0
>> num P4 programs 1
>> p4_name: bf_router
>> p4_pipeline_name: pipe
>> libpd:
>> libpdthrift:
>> context:
>> /home/mc36/bf-sde-9.9.0//install//bf_router.tofino/pipe/context.json
>> config:
>> /home/mc36/bf-sde-9.9.0//install//bf_router.tofino/pipe/tofino.bin
>> Pipes in scope [0 1 2 3 ]
>> diag:
>> accton diag:
>> Agent[0]: /home/mc36/bf-sde-9.9.0//install//lib/libpltfm_mgr.so
>> bf_switchd: library /home/mc36/bf-sde-9.9.0//install//lib/libpltfm_mgr.so
>> loaded
>> bf_switchd: agent[0] initialized
>
>> Platform Manager: Starting BF2556X-1T
>> Platform Manager: Initialising SMB (i2c) subsystem
>> Platform SMB: Detecting system device
>> Platform SMB: System i2c bus found at /dev/i2c-2
>> Platform Manager: Initialising QSFP subsystem
>> Platform Manager: Initialising IPC (socket) subsystem
>> Platform IPC: Socket at /tmp/tofino_usocket ready
>> Platform Manager: Initialising IPMI (sensor) subsystem
>
>> Device 0: Operational mode set to ASIC
>> Initialized the device types using platforms infra API
>> ASIC detected at PCI /sys/class/bf/bf0/device
>> ASIC pci device id is 16 (0x0010)
>> Skipped pkt-mgr init
>> Starting PD-API RPC server on port 9090
>> bf_switchd: drivers initialized
>> 2022-06-21 22:41:25.722285 BF_PIPE ERROR - pipe_mgr_set_dev_info: Unknown
>> device family. Please check if running correct version of the
>> drivers for the device.
>> 2022-06-21 22:41:25.722395 BF_SYS ERROR - ASSERTION FAILED: "0" (0) from
>> pipe_mgr_set_dev_info:1982
>> 2022-06-21 22:41:25.722416 BF_PIPE ERROR - pipe_mgr_add_rmt_device: failed
>> to initialize device info
>> 2022-06-21 22:41:25.723010 BF_PIPE ERROR - pipe_mgr_add_device: failed to
>> instantiate device Invalid arguments 3
>> 2022-06-21 22:41:25.723036 BF_DVM ERROR - Device add handling failed for
>> dev 0, sts Invalid arguments (3), Client pipe-mgr
>> 2022-06-21 22:41:25.723052 BF_DVM ERROR - Device add failed for dev 0, sts
>> Invalid arguments (3)
>> 2022-06-21 22:41:25.723513 BF_TM ERROR - TM: tm_remove_device called
>> without valid tm_ctx for device 0
>> 2022-06-21 22:41:25.723631 BF_PIPE ERROR - pipe_mgr_remove_device: failed
>> to de-instantiate device 0
>> /home/mc36/bf-sde-9.9.0//run_switchd.sh: line 218: 1104 Segmentation
>> fault sudo env "SDE=$SDE" "SDE_INSTALL=$SDE_INSTALL"
>> $ASAN_ON_ERROR "PATH=$PATH"
>> "LD_LIBRARY_PATH=$LD_LIBRARY_PATH" $DBG bf_switchd
>> "$SERVER_LISTEN_LOCAL_ONLY" --install-dir $SDE_INSTALL --conf-file
>> $TARGET_CONFIG_FILE
>> "--init-mode=$INIT_MODE" $SKIP_HLD_STR
>> $SKIP_P4_STR $SKIP_PORT_ADD_STR $STS_PORT_STR $KERNEL_PKT_STR
>> $SHELL_NO_WAIT $@
>> mc36@stordis:~$
>> mc36@stordis:~$ ps aux | grep bf
>> mc36 1128 0.0 0.0 6180 716 pts/0 S+ 22:41 0:00 grep bf
>> mc36@stordis:~$
>
>> On 6/21/22 22:32, Gawen Davey wrote:
>>> Are you able to provide me with "s.sh" script?
>>>
>>> Also with respect to the execve errors, is ipmitool installed?
>>>
>> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>> *From:* mc36 <>
>>> *Sent:* 21 June 2022 21:30
>>> *To:* Gawen Davey <>
>>> *Cc:* <>; Alexander Gall
>>> <>; Alexander Jeffries
>> <>; Fr d ric LOUI
>>> <>
>>> *Subject:* Re: Access
>>> hi,
>>> thanks a lot! at this time it compiled, but i was not able to start the
>>> switchd...
>>> it seems it spawned up a lot of bf_switchds, and the one ran,
>>> segfaulted...
>>> thanks,
>>> cs
>>>
>>>
>>> mc36@stordis:~$ cat s.sh
>>> #/bin/bash
>>> echo 256 | sudo tee /proc/sys/vm/nr_hugepages
>>> sudo modprobe -r igb
>>> sudo modprobe -r i2c_i801
>>> sudo modprobe -r i2c_dev
>>> sudo modprobe i2c_dev
>>> sudo modprobe igb
>>> sudo modprobe i2c_i801
>>> sudo i2cdetect -l
>>> sudo -E $SDE/pkgsrc/bf-drivers/kdrv/bf_kpkt_mod_load $SDE/install
>>> sudo -E $SDE/run_switchd.sh -p bf_router
>>> mc36@stordis:~$
>>> mc36@stordis:~$ ./s.sh
>>> 256
>>> i2c-1 i2c igb BB
>>> I2C adapter
>>> i2c-2 smbus SMBus I801 adapter at f000
>>> SMBus adapter
>>> i2c-0 i2c igb BB
>>> I2C adapter
>>> insmod: ERROR: could not insert module
>>> /home/mc36/bf-sde-9.9.0//install/lib/modules/bf_kpkt.ko: File exists
>>> Using SDE /home/mc36/bf-sde-9.9.0/
>>> Using SDE_INSTALL /home/mc36/bf-sde-9.9.0//install/
>>> Setting up DMA Memory Pool
>>> Using TARGET_CONFIG_FILE
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> Using PATH
>>> /home/mc36/bf-sde-9.9.0//install//bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
>>> Using LD_LIBRARY_PATH
>>> /usr/local/lib:/home/mc36/bf-sde-9.9.0//install//lib:
>>> checking for bf_sysfs_fname /sys/class/bf/bf0/device/dev_add
>>> kernel mode packet driver present, forcing kernel_pkt option!
>>> bf_switchd: Install dir: /home/mc36/bf-sde-9.9.0//install/
>>> bf_switchd: system services initialized
>>> bf_switchd: loading conf_file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf...
>>> bf_switchd: processing device configuration...
>>> Configuration for dev_id 0
>>> Family : tofino
>>> pci_sysfs_str : /sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0
>>> pci_int_mode : 0
>>> sds_fw_path : share/tofino_sds_fw/avago/firmware
>>> bf_switchd: processing P4 configuration...
>>> P4 profile for dev_id 0
>>> num P4 programs 1
>>> p4_name: bf_router
>>> p4_pipeline_name: pipe
>>> libpd:
>>> libpdthrift:
>>> context:
>>> /home/mc36/bf-sde-9.9.0//install//bf_router.tofino/pipe/context.json
>>> config: /home/mc36/bf-sde-9.9.0//install//bf_router.tofino/pipe/tofino.bin
>>> Pipes in scope [0 1 2 3 ]
>>> diag:
>>> accton diag:
>>> Agent[0]: /home/mc36/bf-sde-9.9.0//install//lib/libpltfm_mgr.so
>>> bf_switchd: library /home/mc36/bf-sde-9.9.0//install//lib/libpltfm_mgr.so
>>> loaded
>>> bf_switchd: agent[0] initialized
>>>
>>> Platform Manager: Starting BF2556X-1T
>>> Platform Manager: Initialising SMB (i2c) subsystem
>>> Platform SMB: Detecting system device
>>> Platform SMB: System i2c bus found at /dev/i2c-2
>>> Platform Manager: Initialising QSFP subsystem
>>> Platform Manager: Initialising IPC (socket) subsystem
>>> Platform IPC: Socket at /tmp/tofino_usocket ready
>>> Platform Manager: Initialising IPMI (sensor) subsystem
>>>
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> Device 0: Operational mode set to ASIC
>>> Initialized the device types using platforms infra API
>>> ASIC detected at PCI /sys/class/bf/bf0/device
>>> ASIC pci device id is 16 (0x0010)
>>> Skipped pkt-mgr init
>>> Starting PD-API RPC server on port 9090
>>> bf_switchd: drivers initialized
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> 2022-06-21 22:25:20.692282 BF_PIPE ERROR - pipe_mgr_set_dev_info: Unknown
>>> device family. Please check if running correct version of the
>> drivers for the device.
>>> 2022-06-21 22:25:20.692428 BF_SYS ERROR - ASSERTION FAILED: "0" (0) from
>>> pipe_mgr_set_dev_info:1982
>>> 2022-06-21 22:25:20.692458 BF_PIPE ERROR - pipe_mgr_add_rmt_device:
>>> failed to initialize device info
>>> 2022-06-21 22:25:20.693041 BF_PIPE ERROR - pipe_mgr_add_device: failed to
>>> instantiate device Invalid arguments 3
>>> 2022-06-21 22:25:20.693066 BF_DVM ERROR - Device add handling failed for
>>> dev 0, sts Invalid arguments (3), Client pipe-mgr
>>> 2022-06-21 22:25:20.693080 BF_DVM ERROR - Device add failed for dev 0,
>>> sts Invalid arguments (3)
>>> 2022-06-21 22:25:20.694026 BF_TM ERROR - TM: tm_remove_device called
>>> without valid tm_ctx for device 0
>>> 2022-06-21 22:25:20.694156 BF_PIPE ERROR - pipe_mgr_remove_device: failed
>>> to de-instantiate device 0
>>> ERROR: bf_device_add failed(3) for dev_id 0
>>> ERROR: bf_switchd_device_add failed(Invalid arguments) for dev_id 0
>>>
>>> bf_switchd: initialized 0 devices
>>> 2022-06-21 22:25:20.701574 BF_SYS ERROR -
>>> /home/mc36/bf-sde-9.9.0//install//lib/libdriver.so(+0x1c53bf2)
>>> [0x7efea1496bf2]
>>> 2022-06-21 22:25:20.701623 BF_SYS ERROR -
>>> /home/mc36/bf-sde-9.9.0//install//lib/libdriver.so(bf_switchd_lib_init+0x12ff)
>>> [0x7efea149cdff]
>>> 2022-06-21 22:25:20.701659 BF_SYS ERROR - bf_switchd(+0x3773)
>>> [0x5620f8b74773]
>>> 2022-06-21 22:25:20.701676 BF_SYS ERROR -
>>> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xea) [0x7efe9f426d0a]
>>> 2022-06-21 22:25:20.701690 BF_SYS ERROR - bf_switchd(+0x398a)
>>> [0x5620f8b7498a]
>>> /home/mc36/bf-sde-9.9.0//run_switchd.sh: line 218: 1171 Segmentation
>>> fault sudo env "SDE=$SDE" "SDE_INSTALL=$SDE_INSTALL"
>> $ASAN_ON_ERROR "PATH=$PATH"
>>> "LD_LIBRARY_PATH=$LD_LIBRARY_PATH" $DBG bf_switchd
>>> "$SERVER_LISTEN_LOCAL_ONLY" --install-dir $SDE_INSTALL --conf-file
>>> $TARGET_CONFIG_FILE
>> "--init-mode=$INIT_MODE" $SKIP_HLD_STR
>>> $SKIP_P4_STR $SKIP_PORT_ADD_STR $STS_PORT_STR $KERNEL_PKT_STR
>>> $SHELL_NO_WAIT $@
>>> mc36@stordis:~$ execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> execve: No such file or directory
>>> ps auexecve: No such file or directory
>>> x | gexecve: No such file or directory
>>> rep bf
>>> root 1188 0.0 0.0 397368 30916 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1189 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1190 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1195 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1196 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1197 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1199 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1200 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1201 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1202 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1203 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1204 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1205 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1206 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1207 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1208 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1209 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1210 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1211 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1212 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1213 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1214 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1215 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1216 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1217 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1218 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1219 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1220 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1221 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1222 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1223 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1224 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1225 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1226 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1227 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1228 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1229 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1230 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1231 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1232 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1233 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1234 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1235 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1236 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1237 0.0 0.0 397368 29208 pts/0 S
>>> 22:25 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1238 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1239 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1240 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1241 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1242 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1243 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1244 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1245 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1246 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1247 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1248 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1249 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1250 0.0 0.0 397368 29208 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> root 1251 0.0 0.0 397368 28056 pts/0 S
>>> 22:26 0:00 bf_switchd --install-dir /home/mc36/bf-sde-9.9.0//
>> install/ --conf-file
>>> /home/mc36/bf-sde-9.9.0//install//share/p4/targets/tofino/bf_router.conf
>>> --init-mode=cold --status-port 7777
>>> mc36 1253 0.0 0.0 6180 656 pts/0 S+
>>> 22:26 0:00 grep bf
>>> mc36@stordis:~$
>>> mc36@stordis:~$ sudo dmesg | tail -n 10
>>> [ 157.468161] igb 0000:0a:00.0: enp10s0: (PCIe:2.5Gb/s:Width x1)
>>> 84:c7:8f:02:20:60
>>> [ 157.476470] igb 0000:0a:00.0: enp10s0: PBA No: 000300-000
>>> [ 157.482502] igb 0000:0a:00.0: Using MSI-X interrupts. 4 rx queue(s),
>>> 4 tx queue(s)
>>> [ 157.539542] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>>> [ 157.546815] i2c i2c-2: 2/4 memory slots populated (from DMI)
>>> [ 157.580407] igb 0000:0a:00.0 enp10s0: igb: enp10s0 NIC Link is Up
>>> 1000 Mbps Full Duplex, Flow Control: RX
>>> [ 157.591436] IPv6: ADDRCONF(NETDEV_CHANGE): enp10s0: link becomes ready
>>> [ 159.850151] bf_m_init 31
>>> [ 162.908657] bf_switchd[1172]: segfault at 0 ip 0000000000000000 sp
>>> 00007fff38f15ce8 error 14 in bf_switchd[5620f8b71000+3000]
>>> [ 162.921341] Code: Unable to access opcode bytes at RIP
>>> 0xffffffffffffffd6.
>>> mc36@stordis:~$ execve: No such file or directory
>>>
>>>
>>>
>>> On 6/21/22 21:39, Gawen Davey wrote:
>>>> That was my fault
>>>>
>>>> The SDE doesn't have "bfsys" and "bfutils" etc anymore. They've now
>>>> named them "target_sys" and "target_utils" for some reason.
>>>>
>>>> I had the older versions in my library path and was linking against them
>>>> instead.
>>>>
>>>> The list files have been updated to select the correct libs and been
>>>> uploaded to the ticket. Third times the charm.
>>>>
>> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>> *From:* mc36 <>
>>>> *Sent:* 21 June 2022 20:23
>>>> *To:* Gawen Davey <>
>>>> *Cc:* <>; Alexander
>>>> Gall <>; Alexander Jeffries
>> <>; Fr d ric LOUI
>>>> <>
>>>> *Subject:* Re: Access
>>>> hi,
>>>>
>>>> i've recompiled the sde for hw but without bsp and given a try to the
>>>> build.sh but no luck:
>>>>
>>>> mc36@stordis:~/apsn-bsp-9.9.0-147974d-dirty$ ./build.sh -p BF2556X-1T -i
>>>> $SDE/install/
>>>> CMake Warning (dev) at CMakeLists.txt:1 (project):
>>>> Policy CMP0048 is not set: project() command manages VERSION variables.
>>>> Run "cmake --help-policy CMP0048" for policy details. Use the
>>>> cmake_policy
>>>> command to set the policy and suppress this warning.
>>>>
>>>> The following variable(s) would be set to empty:
>>>>
>>>> CMAKE_PROJECT_VERSION
>>>> CMAKE_PROJECT_VERSION_MAJOR
>>>> CMAKE_PROJECT_VERSION_MINOR
>>>> CMAKE_PROJECT_VERSION_PATCH
>>>> This warning is for project developers. Use -Wno-dev to suppress it.
>>>>
>>>> -- Populating googletest
>>>> -- Configuring done
>>>> -- Generating done
>>>> -- Build files have been written to:
>>>> /home/mc36/apsn-bsp-9.9.0-147974d-dirty/build/_deps/googletest-subbuild
>>>> [100%] Built target googletest-populate
>>>> -- Configuring done
>>>> -- Generating done
>>>> -- Build files have been written to:
>>>> /home/mc36/apsn-bsp-9.9.0-147974d-dirty/build
>>>> [ 19%] Built target pltfm_driver_o
>>>> [ 29%] Built target pltfm_util_o
>>>> [ 57%] Built target bf2556x_driver_o
>>>> [ 61%] Built target pltfm_o
>>>> [ 63%] Built target pltfm_mgr
>>>> [ 64%] Linking C shared library
>>>> /home/mc36/bf-sde-9.9.0/install/lib/libbf2556x_driver.so
>>>> /usr/bin/ld: cannot find -lbfsys
>>>> collect2: error: ld returned 1 exit status
>>>> make[2]: ***
>>>> [platforms/bf2556x-1t/src/CMakeFiles/bf2556x_driver.dir/build.make:132:
>>>> /home/mc36/bf-sde-9.9.0/install/lib/
>> libbf2556x_driver.so] Error 1
>>>> make[1]: *** [CMakeFiles/Makefile2:402:
>>>> platforms/bf2556x-1t/src/CMakeFiles/bf2556x_driver.dir/all] Error 2
>>>> make: *** [Makefile:160: all] Error 2
>>>> mc36@stordis:~/apsn-bsp-9.9.0-147974d-dirty$
>>>>
>>>> i only found this
>>>>
>>>> mc36@stordis:~/bf-sde-9.9.0$ find . -name *bfsys*
>>>> ./build/pkgsrc/bf-utils/src/CMakeFiles/bfsysutil_o.dir
>>>> mc36@stordis:~/bf-sde-9.9.0$
>>>>
>>>> what i should do something to the sde to generate the libbfsys?
>>>>
>>>> thanks?
>>>> cs
>>>>
>>>>
>>>> On 6/21/22 19:36, Gawen Davey wrote:
>>>>> There is a cmake option to select the platform to be built, via
>>>>> ${PLATFORM}. I think it's empty which is why it's coming up with the
>> error. I was trying to prepare in advance a BSP
>>>>> that could host code for both the 2556x and 6064x.
>>>>>
>>>>> I'm not quite sure how to set that at the moment, via p4studio.
>>>>>
>>>>> I've uploaded a version that doesn't use that test.
>>>>>
>>>>> Otherwise, workarounds would be to remove that if statement, but
>>>>> preserving adding the bf2556x-1t subdirectory, or build the SDE
>> without the BSP.
>>>>>
>>>>> You can then use the build script to build it separately -- should be
>>>>> in the bf-platforms inner tarball. The script has a help output
>> flag, should you need it.
>>>>>
>> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>>> *From:* mc36 <>
>>>>> *Sent:* 21 June 2022 18:26
>>>>> *To:* Gawen Davey <>
>>>>> *Cc:* <>; Alexander
>>>>> Gall <>; Alexander Jeffries
>> <>; Fr d ric LOUI
>>>>> <>
>>>>> *Subject:* Re: Access
>>>>> hi,
>>>>> i've fed the package to the sde and it stopped with the below message..
>>>>> also attaching the mentioned logs... any idea on how to compile for the
>>>>> sde?
>>>>> thanks,
>>>>> cs
>>>>>
>>>>> Begin bf-platforms setup
>>>>> CMake Error at pkgsrc/bf-platforms/platforms/CMakeLists.txt:6 (if):
>>>>> if given arguments:
>>>>> "STREQUAL" "BF2556X-1T"
>>>>> Unknown arguments specified
>>>>> -- Configuring incomplete, errors occurred!
>>>>> See also "/home/mc36/bf-sde-9.9.0/build/CMakeFiles/CMakeOutput.log".
>>>>> See also "/home/mc36/bf-sde-9.9.0/build/CMakeFiles/CMakeError.log".
>>>>> - pi: Cmd 'cmake /home/mc36/bf-sde-9.9.0 -DTOFINO2H=OFF -DTOFINO3=OFF
>>>>> -DASIC=ON -DTOFINO2=OFF -DTOFINO2M=OFF
>> -DP4RT=ON -DTOFINO=OFF -DBSP=ON -DCMAKE_BUILD_TYPE='relwithdebinfo'
>>>>> -DCMAKE_INSTALL_PREFIX='/home/mc36/bf-sde-9.9.0/install'' took:
>>>>> 0:00:11.044427, status: 1
>>>>> Error: cmake completed unsuccessfully
>>>>>
>>>>>
>>>>>
>>>>> On 6/21/22 18:44, mc36 wrote:
>>>>>> hi,
>>>>>> thanks, i've got it... i'll give it a spin asap and will provide you
>>>>>> some feedback...
>>>>>> br,
>>>>>> cs
>>>>>>
>>>>>>
>>>>>> On 6/21/22 18:41, Gawen Davey wrote:
>>>>>>> Should have been an attachment.
>>>>>>>
>>>>>>> I've replied with a comment containing a link.
>>>>>>>
>>>>>>> If that doesn't work I'll try and email you.
>>>>>>>
>> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>>>>> *From:* mc36 <>
>>>>>>> *Sent:* 21 June 2022 17:39
>>>>>>> *To:* Gawen Davey <>
>>>>>>> *Cc:* <>; Alexander
>>>>>>> Gall <>; Alexander Jeffries
>> <>; Fr d ric LOUI
>>>>>>> <>
>>>>>>> *Subject:* Re: Access
>>>>>>> hi,
>>>>>>> thanks a lot! where can i grab the files for testing?
>>>>>>> (i had no luck nor under the ticker nor at the search bar)
>>>>>>> br,
>>>>>>> cs
>>>>>>>
>>>>>>> On 6/21/22 18:34, Gawen Davey wrote:
>>>>>>>> I've released a beta tarball to you via our service desk.
>>>>>>>>
>>>>>>>> Frederic, I've made you the reporter, and Csaba, you're a
>>>>>>>> participant.
>>>>>>>>
>> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>>>>>> *From:* mc36 <>
>>>>>>>> *Sent:* 14 June 2022 16:03
>>>>>>>> *To:* Gawen Davey <>
>>>>>>>> *Cc:* <>; Alexander
>>>>>>>> Gall <>; Alexander Jeffries
>> <>; Fr d
>> ric LOUI
>>>>>>>> <>
>>>>>>>> *Subject:* Re: Access
>>>>>>>> hi,
>>>>>>>> sounds good, thanks... if you have anything that could be
>>>>>>>> beta-tested, let us know :)
>>>>>>>> thanks,
>>>>>>>> cs
>>>>>>>>
>>>>>>>>
>>>>>>>> On 6/14/22 16:31, Gawen Davey wrote:
>>>>>>>>> Hi Csaba,
>>>>>>>>>
>>>>>>>>> I'm working to get this out as soon as possible. I can't be
>>>>>>>>> specific about dates as I don't want to over promise. But I am
>>>>>>>>> working on
>> it full time at the moment.
>>>>>>>>>
>>>>>>>>> Gawen
>>>>>>>>>
>> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>> *From:* mc36 <>
>>>>>>>>> *Sent:* 14 June 2022 15:29
>>>>>>>>> *To:* Gawen Davey <>
>>>>>>>>> *Cc:* <>;
>>>>>>>>> Alexander Gall <>; Alexander Jeffries
>> <>; Fr
>> d ric LOUI
>>>>>>>>> <>
>>>>>>>>> *Subject:* Re: Access
>>>>>>>>> hi,
>>>>>>>>> any news about the bsp for sde990 on aps2556?
>>>>>>>>> thanks,
>>>>>>>>> cs
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 6/2/22 13:22, mc36 wrote:
>>>>>>>>>> hi,
>>>>>>>>>> have you managed to update the bf2556x bsp to sde990?
>>>>>>>>>> thanks,
>>>>>>>>>> cs
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 4/30/22 13:00, Gawen Davey wrote:
>>>>>>>>>>> If you like, that would be
>>>>>>>>>>> great. I won't be touching it until
>> Monday though
>>>>>>>>>>>
>> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>>>>>>>>>
>>>>>>>>>>> *From:* mc36 <>
>>>>>>>>>>> *Sent:* 30 April 2022 12:00
>>>>>>>>>>> *To:* Gawen Davey <>
>>>>>>>>>>> *Cc:* Fr
>>>>>>>>>>>
>> d ric LOUI
>> <>
>>>>>>>>>>> *Subject:* Re: Access
>>>>>>>>>>> hmmm, if that helps you out, i can upload it to
>>>>>>>>>>> access@bf2556x-r1-u17 ?
>>>>>>>>>>>
>>>>>>>>>>> On 4/30/22 12:56, Gawen Davey wrote:
>>>>>>>>>>>> So I didn't receive the new SDE until the collection was updated
>>>>>>>>>>>> today, so it might be a week or two before I get something out.
>>>>>>>>>>>>
>> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>>>>>>>>>>
>>>>>>>>>>>> *From:* mc36 <>
>>>>>>>>>>>> *Sent:* 30 April 2022 11:55
>>>>>>>>>>>> *To:* Gawen Davey <>
>>>>>>>>>>>> *Cc:*
>> Fr
>>
>> d
>> ric LOUI
>> <>
>>>>>>>>>>>> *Subject:* Re: Access
>>>>>>>>>>>> hi,
>>>>>>>>>>>> thanks a lot! so the issue was, in my keepass, only the domain
>>>>>>>>>>>> was saved and that one redirected me where i pushed the access
>> request...
>>>>>>>>>>>> anyway, i was about to check if you already have something for
>>>>>>>>>>>> the fresh sde990?
>>>>>>>>>>>> (i've just started rebuilding my dataplane vms to run those ~400
>>>>>>>>>>>> integration tests of ours with it...)
>>>>>>>>>>>> thanks,
>>>>>>>>>>>> cs
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On 4/30/22 12:44, Gawen Davey wrote:
>>>>>>>>>>>>> Hey Csaba,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I just saw you tried to get access to JIRA -- that's our
>>>>>>>>>>>>> internal instance.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Presuming you wanted to get to the support portal?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Could you try https://aps-networks.atlassian.net/servicedesk
>>>>>>>>>>>>> <https://aps-networks.atlassian.net/servicedesk> <
>> https://aps-networks.atlassian.net/servicedesk
>>> <https://aps-networks.atlassian.net/servicedesk>>
>>> <https://aps-networks.atlassian.net/servicedesk
>>>> <https://aps-networks.atlassian.net/servicedesk
>>>> <https://aps-networks.atlassian.net/servicedesk>>> <
>> https://aps-networks.atlassian.net/servicedesk
>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>> <https://aps-networks.atlassian.net/servicedesk <
>> https://aps-networks.atlassian.net/servicedesk>>>>
>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>> <https://aps-networks.atlassian.net/servicedesk <
>> https://aps-networks.atlassian.net/servicedesk
>>> <https://aps-networks.atlassian.net/servicedesk>>>>>
>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>>> <https://aps-networks.atlassian.net/servicedesk <
>> https://aps-networks.atlassian.net/servicedesk
>>>> <https://aps-networks.atlassian.net/servicedesk
>>>> <https://aps-networks.atlassian.net/servicedesk>>>>>>
>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>>>> <https://aps-networks.atlassian.net/servicedesk <
>> https://aps-networks.atlassian.net/servicedesk
>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>> <https://aps-networks.atlassian.net/servicedesk <
>> https://aps-networks.atlassian.net/servicedesk>>>>>>>
>>>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>>>>>> <https://aps-networks.atlassian.net/servicedesk <
>> https://aps-networks.atlassian.net/servicedesk
>>>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>> <https://aps-networks.atlassian.net/servicedesk <
>> https://aps-networks.atlassian.net/servicedesk
>>> <https://aps-networks.atlassian.net/servicedesk>>>>>>>>
>>>>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>>>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>>>>>>> <https://aps-networks.atlassian.net/servicedesk <
>> https://aps-networks.atlassian.net/servicedesk
>>>>>>>> <https://aps-networks.atlassian.net/servicedesk
>>>>>>>> <https://aps-networks.atlassian.net/servicedesk <
>> https://aps-networks.atlassian.net/servicedesk
>>>> <https://aps-networks.atlassian.net/servicedesk
>>>> <https://aps-networks.atlassian.net/servicedesk>>>>>>>>>?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Gawen
>



Archive powered by MHonArc 2.6.19.

Top of Page